Recently got my hands on the Mous Limitless 4 - Aramid Fiber case! That’s not all, I have the Limitless 3 too!
nice review and pics. the tight fit and hard to remove is why i won’t buy it. i also read elsewhere that the MagSafe strength is weak. how does it seem to you?
I’m really liking the white case.
and i have heard that the inside doesnt have suede anymore ...
Does the L 4.0 appear to be a dust magnet? Are the relief cuts(slits) around the volume, eyelet on one of the sides, symmetrical bottom cutouts and other cutouts accumulate dust, lint, and debris quickly? Also is the new tpu internal lining appear to be less protective to the back against scratches as opposed to the 3.0's microfiber internal lining? Lastly, how is the magnet
strength. The only youtuber to review the 4.0 claims the magnets are as strong as the Apple cases. Are you finding that to be true?
and i have heard that the inside doesnt have suede anymore ... This is true, the lining does not exist anymore, and I don’t see that as a downside, it makes the case thinner.
Does the L 4.0 appear to be a dust magnet? Are the relief cuts(slits) around the volume, eyelet on one of the sides, symmetrical bottom cutouts and other cutouts accumulate dust, lint, and debris quickly? Also is the new tpu internal lining appear to be less protective to
the back against scratches as opposed to the 3.0's microfiber internal lining? Lastly, how is the magnet strength. The only youtuber to review the 4.0 claims the magnets are as strong as the Apple cases. Are you finding that to be true? Honestly not, it gathers just as much dust as any other case would. And I’ve seen the only review online, I don’t have other MagSafe accessories for me to try it out sorry! If I get my hands on one, I’ll update this post.
This is true, the lining does not exist anymore, and I don’t see that as a downside, it makes the case thinner. yes true.but if its hard then if dust gets in between it might scratch the phone.with the suede it wouldnt happen as the suede will hold
the dust in place. kinda sort of...
Honestly not, it gathers just as much dust as any other case would. And I’ve seen the only review online, I don’t have other MagSafe accessories for me to try it out sorry! If I get my hands on one, I’ll update this post. Thank you for the quick response. What about the lining? Does it look as protective as the 3.0's microfiber for the back of the phone? Also, is the gap for the eyelet(lanyard hole) deep? Someone on reddit claims the eyelet is unnecessary and fills up with lint and dust. If that's the case
I would be concerned about the sensitive stainless steel frame over time, as the relief cuts and eyelets expose the frame. Do you find this to be an issue? Also, are the relief cuts large or somewhat subtle just for the purpose of providing tactile buttons? Thanks again. Last edited: Mar 12, 2021
yes true.but if its hard then if dust gets in between it might scratch the phone.with the suede it wouldnt happen as the suede will hold the dust in place. kinda sort of... That's my concern. The tech21 evocheck diamonds on the internal lining
created permanent markings/imprints on my pixel 2xl. I'd personally be more concerned about the eyelet cutout as dust accumulates over time and the difficulty of removing the case on/off will just cause you to forget about cleaning the case or phone. Therefore, the outline of the eyelet could create an imprint or micro scratch in the stainless steel. However, this is my first iPhone. I'm just going by what happened to my old iPods which also used stainless steel.
That's my concern. The tech21 evocheck diamonds on the internal lining created permanent markings/imprints on my pixel 2xl. I'd personally be more concerned about the eyelet cutout as dust accumulates over time and the difficulty of removing the case on/off will just cause
you to forget about cleaning the case or phone. Therefore, the outline of the eyelet could create an imprint or micro scratch in the stainless steel. However, this is my first iPhone. I'm just going by what happened to my old iPods which also used stainless steel. Reminds me of Rhinoshield Solidsuit. Pretty case but it leaves marks all around.
Thank you for the quick response. What about the lining? Does it look as protective as the 3.0's microfiber for the back of the phone? Also, is the gap for the eyelet(lanyard hole) deep? Someone on reddit claims the eyelet is unnecessary and fills up with lint and dust. If
that's the case I would be concerned about the sensitive stainless steel frame over time, as the relief cuts and eyelets expose the frame. Do you find this to be an issue? Also, are the relief cuts large or somewhat subtle just for the purpose of providing tactile buttons? Thanks again. I added in more images for you! The lanyard eyelet would not hold a lanyard with a thick cord, and I would not use a lanyard with a thin one if I really wanted it to help and not break
out in a few months. Reminds me of Rhinoshield Solidsuit. Pretty case but it leaves marks all around. This one potentially could, after a few years of use, but by then, I'd have hit the end of life of this phone. IMG_0343.JPG 193.1 KB · Views: 690 IMG_0341.JPG 251 KB · Views: 464 IMG_0340.JPG 195.9 KB · Views: 476 IMG_0339.JPG 253.9 KB · Views: 441
I added in more images for you! The lanyard eyelet would not hold a lanyard with a thick cord, and I would not use a lanyard with a thin one if I really wanted it to help and not break out in a few months. Thank you for
the quick response and the pics. These are the clearest pics of the lint and dust buildup I've seen online. I can see it's slightly dusty around the eyelet. Someone on reddit had the same complaint. It's a great looking case though. Keep us updated on the life of the case. Hopefully the dust doesn't create imprints and scratches when pressed between the phone and case. Someone on the Nomad rugged thread mentioned there was a dust imprint(though it did rub off) from the ring on the lining of the
case. I'm curious if this going to be problem for the mous as it uses TPU and the Nomad uses microfiber suede. Thanks again!
Yeah for me, those relative wide slits for the buttons are deal killer. Yes, the slits make the buttons buttery smooth….but too open and will let dust/sand/dirt to get between case buttons and phone.
Yeah for me, those relative wide slits for the buttons are deal killer. Yes, the slits make the buttons buttery smooth….but too open and will let dust/sand/dirt to get between case buttons and phone. Yeah, that's my concern. I wish there was someway you could cover up those cutouts, especially the large eyelet on the side. Maybe with a D-brand skin on the inside and outside of the case? Unfortunately, a lot of case brands like the two you mentioned above and even D-brand and Pitaka offer that. I am currently using a Catalyst Influence in Pacific Blue. It covers everything except the camera module and lightening port. It's awesome. Unfortunately,
it doesn't offer a magsafe magnet and I've been looking for a decent case that has a strong magsafe connection as well as offering good dust and debris and shock protection.
Yeah, that's my concern. I wish there was someway you could cover up those cutouts, especially the large eyelet on the side. Maybe with a D-brand skin on the inside and outside of the case? Unfortunately, a lot of case brands like the two you mentioned above and even D-brand
and Pitaka offer that. I am currently using a Catalyst Influence in Pacific Blue. It covers everything except the camera module and lightening port. It's awesome. Unfortunately, it doesn't offer a magsafe magnet and I've been looking for a decent case that has a strong magsafe connection as well as offering good dust and debris and shock protection. I am currently using Apple Clear case. It has its issue (faint stress cracks on the inside at bottoms). But the fit is
fantastic…with minimal dust intrusion. Buttons could be better…but relative to other CLEAR cases from 3rd party, the buttons are on the good side.
Yeah for me, those relative wide slits for the buttons are deal killer. Yes, the slits make the buttons buttery smooth….but too open and will let dust/sand/dirt to get between case buttons and phone. So I thought I would chime in because I have had the Mous case on my iPhone X since launch. It does not have any suede inside and there are cut outs.
Thank you for the quick response and the pics. These are the clearest pics of the lint and dust buildup I've seen online. I can see it's slightly dusty around the eyelet. Someone on reddit had the same complaint. It's a great looking case though. Keep us updated on the life
of the case. Hopefully the dust doesn't create imprints and scratches when pressed between the phone and case. Someone on the Nomad rugged thread mentioned there was a dust imprint(though it did rub off) from the ring on the lining of the case. I'm curious if this going to be problem for the mous as it uses TPU and the Nomad uses microfiber suede. Thanks again! Get the casetify leather case with MagSafe as that’s what I bought. No unnecessary cut outs and even covers
the entire frame of the iPhone unlike Apple cases which leaves the rim exposed. The volume cut outs are also asymmetrical making them smaller. Plus the suede lining on the inside is soft
I’ve got the black speckled one, it’s my first Mous case and I do like it. Enough I’ve ordered a matching case for my AirPods Pro. I haven’t found the mute switch any harder to access than the Apple leather case for example. Magnets seem about as strong too. The speckled material has a nice texture to it imo, and gives it some grip on the back.
I’ve got the black speckled one, it’s my first Mous case and I do like it. Enough I’ve ordered a matching case for my AirPods Pro. I haven’t found the mute switch any harder to access than the Apple leather case for example. Magnets seem about as strong too. The speckled material has
a nice texture to it imo, and gives it some grip on the back. Could you comment on grip on the sides please when compared to tpu case per say ?
Could you comment on grip on the sides please when compared to tpu case per say ? we'll see what @Quarric
says, but imo i find them all slippery. i am just careful when i'm holding these large phones.
@darrinS
@darrinS i have a wood backed and had a carbon fiber backed and a leather backed limitless cases. i find them all slippery. but don’t get me wrong, i like the cases.
i have a wood backed and had a carbon fiber backed and a leather backed limitless cases. i find them all slippery. but don’t get me wrong, i like the cases. Ah you pretty much tried all versions then. Does MagSafe work through a Mous case?Mous | Ultra-protective, stylish, and compatible with MagSafe, cases.
What cases are compatible with MagSafe?The 15 Best MagSafe-Compatible iPhone Cases You Can Buy Today. Spigen Tough Armor Mag Case. ... . Peel Super Thin Case. ... . Apple Clear Case w/ MagSafe. ... . Survivor Endurance Case. ... . Otterbox Aneu Series Case. ... . Moment Leather Case. ... . Ghostek Nautical Waterproof Case. ... . MOFT Case, Stand, and Wallet Set.. Are Mous cases military grade?It's a smart, military-grade shock-absorbing material that is compact while offering superior cushioning. “Our unique patent-pending process involves injecting the material with micro crystals that turn into micro air pockets at high temperatures,” the Mous technical team says.
Do Mous cases have real carbon fiber?Perhaps the best detail of the MOUS case is that it uses real carbon fiber — not just a look alike.
|