How to remove water filter from fridge

• Home
• Support
• How-To Guides
• Refrigeration Guides
• How to replace your fridge freezer in line water filter

This guide is specifically for all Beko Fridge Freezer and American Style Fridge Freezer models that have a water dispenser with a plumbed water supply. If you’ve purchased a fridge freezer or side-by-side American style fridge freezer with a plumbed water supply, you’ll need to remember to replace the in-line water filter every six months.

All you have to do is watch out for this symbol

Step by step: How to replace your in line fridge water filter

This is a great way of helping to maintain the quality of the water your fridge freezer dispenses. And, you’ll be able to enjoy cool and refreshing water that will stay clean, fresh and tasting its best too. You’ll know when it’s time to replace your fridge freezer’s in-line water filter when the replacement alert lights up on your display. Watch the video above to see how to replace the in-line water filter, or, follow these quick and easy steps:

1. Turn off the ‘Ice on’ button
2. Shut off the water supply
3. Note the flow direction on the water filter and ensure the new filter follows the same direction
4. Remove the water filter from the wall brackets
5. Remove the fast-fit connectors from the top and bottom of the water filter
6. Press down on the blue section around the water hose and pull the hose away from the water filter to release. Note: A small amount of water will come out from these connections once separated.
7. Connect the two hose ends to the new water filter ensuring the filter is following the correct flow direction. Note: When you are inserting the hoses, you should feel them move inwards in two steps; roughly 18mm of the hose will be inserted into the water filter.
8. Put the fast-fit connectors back on, to stop the hoses form coming out
9. Clip the new water filter back into the wall brackets
10. Check all the connections are tight enough
11. Turn on the water supply. Note: Should you notice any leaks, repeat steps 4-10 again.
12. Begin filtering through approximately 10 glasses of water to wash the filter out. Note: Do not drink this water.

Replacement Water Filters

Available from our dedicated Beko spare parts website

Shop Now

If you have any questions regarding these steps please feel free to contact our customer service team with the model and serial number of your fridge freezer. They will be happy to assist to you.

Need Product Support?

If you have any questions about your Beko appliance, we are here to help. Finding answers and information is easy with Beko’s helpful online resources, simply browse our product support topics below and select the one that is relevant to you.

You need a clean water filter to get fresh, filtered water. We recommend that you replace the water filter every six months. The refrigerator's water filter light will let you know when those six months are up and should be reset after changing the filter.

Note: Only use Samsung Genuine Filters that are designed to work with your Samsung refrigerator. You can purchase them directly on our website. Do not use third-party water filters, which may leak and damage the refrigerator.

There are three types of Samsung water filters, so you’ll want to make sure you're choosing the correct one for your fridge.

First, locate the filter in your fridge model. The location will vary depending on your model, so please check your user manual if you’re unsure. Then, check the model number on the filter itself. This will let you know which of the following filter types you’ll need to purchase.

Replacing your water filter is simple and should only take a few minutes. If you’re unsure about whether you need to replace the filter, check the indicator light on your fridge.

After 6 months, the indicator will change. On some models it lights up when it wasn't lit before, and on others it will turn red. At this time, you should change the filter right away. 

HAF-CIN and HAF-QIN filter types:

1. First, turn off the water supply and then locate the filter. If you are unsure where it is, please consult your user manual.

2. Open the water filter cover and then rotate the old filter counterclockwise to unlock it.

3. Then, pull it straight out to remove it from the filter housing.

4. To insert the new filter, first remove the protection cap from the top of the filter. Then, push it straight into the filter housing and turn it clockwise.

5. Make sure the lock symbol matches up with the indicator line.

HAFCU1 filter types:

1. First, turn off the water supply and then locate the filter. If you are unsure where it is, please consult your user manual.

2. To remove the old filter, twist it to the left. This will unlock it.

   

3. Then, pull it down to remove it from the filter housing.

4. To insert the new filter, push it up into the filter housing and then turn it to the right.

5. Make sure the notch at the top of the filter is matched up with the arrow on the filter housing.

   

After replacing your filter, dispense a few gallons of water to flush out any impurities or air. Then, make sure to reset the water filter light on your fridge. Please see the next sections for more information.

The water filter light on your fridge operates on a timer and will turn on after 6 months. For models where the indicator is always lit, it will turn red after 6 months.

Depending on the quality of the water in your area and the amount of water you dispense, you may want to change the filter more or less frequently than the light suggests. To determine if a new filter is needed, dispense water first with the filter installed and then with the filter removed. If the speed the water dispenses at is significantly different, you should replace the filter whether the indicator is lit or not.

You can use the following steps to reset the filter light:

1. Find the Filter Reset button on the control panel, if it's available. It is sometimes the secondary function of another button on the panel.

2. Once located, touch and hold the correct button for 3 seconds until the light resets.

3. The filter icon will either turn off or change back to its normal color when it's reset. This starts the 6 month timer over again.

Note: Some models may require two buttons to be touched simultaneously to reset the light. Touch screen models will use on-screen menus instead. For instructions specific to your refrigerator, see your user manual.

The water filter light and timer can be reset on your Family Hub fridge with the following steps:

1. From the Home screen, tap Apps, and then tap Fridge Manager.

3. Tap Water Filter, then tap Reset, and then tap Proceed. This will reset the filter light and timer.

4. After tapping the water filter icon, you can tap Buy Filter to purchase a Samsung water filter if needed.

You can also reset the filter light on models RF4289 and RSG309.

1. Navigate to and select the Settings icon at the bottom of the display, and then tap Water Filter.
   

2. When the Water Filter menu opens, tap Next in the bottom right corner three times until you reach page 4/4 of the Water Filter menu.

3. Touch and hold Reset the water filter in the middle of the display until the status of the filter changes.

4. After "Filter Replaced" appears and goes away, tap Save in the bottom right corner of the display.

The National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have various standards to identify what is filtered by a water filter. Samsung's water filters are Carbon Filters rated for the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards.

NSF/ANSI 42

• Filtered to reduce aesthetic impurities such as chlorine and taste/odor.
  

NSF/ANSI 53

• Certified to reduce a contaminant with a health effect. Health effects are set in this standard as regulated by the U.S. Environmental Protection Agency (EPA) and Health Canada.
  

• Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99%), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene, Turbidity
  

NSF/ANSI 401

• Verified to reduce one or more of 15 emerging contaminants from drinking water. These emerging contaminants can be pharmaceuticals or chemicals not yet regulated by the EPA or Health Canada.
  

• Atenolol, Bisphenol A, Carbamazepine, DEET, Estrone, Linuron, Nonylphenol, Phenytoin, Trimethoprim
  

If you are having trouble placing the new water filter in your refrigerator, even though the old one fits, please check out our troubleshooting guide for assistance.

© 2022 Samsung Electronics America, Inc. Samsung, Samsung Galaxy and Family Hub are trademarks of Samsung Electronics Co., Ltd. All other brands, products and services, and their respective trademarks, names and logos, are the property of their respective owners. The above content is provided for entertainment and information purposes only. Consult user manual for more complete information. All information included herein is subject to change without notice. Samsung is not responsible for any direct or indirect damages, arising from or related to use or reliance of the content herein.

How do I get the water filter out of my fridge?

How do I remove a water filter cartridge?

Do I have to turn off water supply to change refrigerator water filter?