How to break into a lock box without breaking it

Q: Are lockboxes easy to break into?

Youd be forgiven for thinking that a lockable device should keep your key well secure. Unfortunately, many lock boxes are made out of materials that cannot withstand impact, making them easy to break into.

Q: Can you break a lock box with a hammer?

Even if youve thought up the craziest lock combination in the history of lock combinations, your stuff still isnt safe. Turns out, any Master Lock can easily be broken into with just a small hammer.

Do not try to force a safe open with a key, if you don’t seem to open it the normal way, just call QuickPro Locksmith, and our professional technician will be right there at your doorstep to get it open very easily without the need for a key. Sometimes, it can be very easy to lose the key to the safe or even forget the combination numbers, but you should have an idea about the procedures to take in order to unlock the safe without the need for a key, these options include;

Table of Contents Show

Hire a Locksmith
How do you get into a lock box without a key?
How can you break into a lock box?
Are lockboxes easy to break into?
Can you break a lock box with a hammer?

Drilling your way in to open the safe,
Open the safe with the aid of a knife,
Make use of a tool like a hammer,
Make use of a screwdriver,
Make use of a paper clip,
Make use of a magnet.

Using a paper clip to open a safe

Perhaps one of the easiest ways to open a safe without a key is to use a paper clip. In order to use a paper clip to open the safe, just make sure the paper clip is straight, then insert the end of the clip into the upper part of the lock. With the aid of a tweezer, hold the paper clip in place, then insert the paper clip into the inner chamber of the lock- make sure the paper clip goes deeper into the lock. Turn the tweezers along with the paper clip in an anti-clockwise position and continue turning until the lock is opened.

Make use of a screwdriver to open a safe without a key

First of all, you need to place the screwdriver on a flat surface, then insert the tip of the screwdriver inside the keyhole. Rotate the screwdriver in a counter-clockwise movement until the lock of the safe opens.

Opening the safe with the aid of a knife or similar tool

Opening the safe with a knife perhaps is the easiest way. To achieve this, simply make use of the tip of the knife and insert it into the keyhole. Shake the knife a little and the lock will eventually open. This procedure should take few seconds or minutes to open the safe.

Drilling through the safe

Drilling is only recommended when there is no better option. Just before you consider drilling, you should call QuickPro Locksmith for an easier option. Drilling can be an option when you have forgotten the combination to the safe or you lost the key. In order to open the safe through drilling, all you have to do is drill a small hole in a position where you can view the lock inside the safe. Once drilling is performed, you can then insert your finger to unlock the lock inside the safe. One of the negative effects of drilling is that it can damage the safe. You must think twice before you take this step.

One of the easiest ways to break a padlock is with a hammer. Start by inserting 2 fingers into the padlock's shackle loop and pull up on the shackle to create tension. Then, tap the side of the lock that contains the fixed end of the shackle with a hammer using quick, short strikes. Avoid hitting the lock with your full strength since the consistent tapping is what breaks it open, not brute force. Keep targeting this area with the hammer until the pins disengage enough for you to pull the lock open. You can also use the handle of a screwdriver or another hard, blunt item if you don’t happen to have a hammer handy! For tips on breaking open a padlock with 2 wrenches, keep reading!

Did this summary help you?YesNo

Thanks to all authors for creating a page that has been read 419,946 times.

A lockbox is designed to protect valuables and important documents from fire and unauthorized access. Lockboxes are designed differently, with some having the conventional padlock and keys; others are modern and contain combination locks. Lockboxes with padlocks are less secure, as the keys can be lost or stolen. However, with combination locks, you can forget the code combination. Whatever the case, losing your keys or forgetting your code combination will lead to a lockout, leaving you without access to your valuables.

This article considers several methods you can employ to open a lockbox without a key.

The Bypassing Method

Bypassing is an excellent method for opening a lockbox without a key. It involves manipulating its actuator through the keyhole. To do this, insert a thin tool that is longer than your key into the keyway up until it reaches the rear of the lock. At this point, you can turn the tool to latch unto the mechanism and unlock the box.

However, you can do a factory reset on combination lockboxes as they come with standard reset codes or pre-drilled holes at the back where you can insert a tool to effect a reset.

Shimming

Shimming is employed for lockboxes that use padlocks. Lockboxes with padlocks are easy to open via shimming as it involves slipping two thin metal pieces between the shackle and body of the lock. Once done, force can be applied to release the latches and open the lock.

The metal pieces, also known as a shim, can be made from an aluminum with scissors. The aluminum can is shaped into an arrow and inserted into the aperture of the lock. While shimming is used mainly for padlocks, combination locks are also vulnerable.

Picking

Picking is perhaps the easiest and most popular way to open a lockbox without a key. Picking a lockbox involves the manipulation of its internal mechanisms. You can use a tension wrench and a paper clip to pick a lockbox. At other times you can employ a pick tool. Picking, however, is usually done by a professional locksmith or burglar, and it can be challenging for a novice.

Decoding

Decoding is a method that requires no tool, and it applies to only wheel combination locks. It involves employing different techniques to figure out the correct combination codes to open the lockbox. The codes are guessed at random in decoding, following a definite pattern. To decode a lock, expertise is not required. One simply has to be patient and pay attention to the grip of the lock as the code is turned. As the correct code is turned, the grip on the lock begins to loosen with each correct code gotten.

Hire a Locksmith

Hiring a locksmith is the safest, fastest, and most guaranteed way to open a lockbox without key. Locksmiths are experienced professionals and can help with all lockout issues, including a lockbox. Hence, if you are locked out of your lockbox, because of a misplaced key, it is advisable to call a local locksmith to help out. If you need a competent "locksmith near me," Colorado Springs Locksmith is a phone call away and is available for all your lock needs.

How do you get into a lock box without a key?

How can you break into a lock box?

You need to use a tool thinner than the key and insert it into the backside of your lock. Now turn the tool until the lockbox opens. Pre-cut holes exist in some locks where you can insert the tool. A factory reset bypass can help you if you forget the access code.

Are lockboxes easy to break into?

You'd be forgiven for thinking that a lockable device should keep your key well secure. Unfortunately, many lock boxes are made out of materials that cannot withstand impact, making them easy to break into.

Can you break a lock box with a hammer?

Even if you've thought up the craziest lock combination in the history of lock combinations, your stuff still isn't safe. Turns out, any Master Lock can easily be broken into with just a small hammer.