How do i find my phone with my watch

Once you have checked the above, try pairing your watch and phone once again. How do I pair the watch with my phone?

If the pairing process still doesn't work:

Your phone cannot find your watch
1. Long-press on the crown until the watch vibrates and open the settings menu.
2. Tap on Restart the watch.
3. Close the Wear OS by Google app.
4. Open the Wear OS by Google app.
5. Try the pairing process again.

The pairing code is not the same, or the phone/watch cannot access it
1. Long-press on the crown until the watch vibrates and open the settings menu.
2. Tap on Restart the watch.
3. Close the Wear OS by Google app.
For iOS users: Go to Settings > Bluetooth and tap on the information button next to your watch name, on the right-hand side. Then, tap on Forget This Device and confirm.
4. Open the Wear OS by Google app.
5. Try the pairing process again.

The Google account could not synchronize:
1. Check your phone's internet connection.
2. If no issue is detected, skip this step to finish the pairing process and follow the steps below to add it later.
3. When you get to a reliable Wi-Fi connection, open the Wear OS by Google app:
  a. Check that the watch is connected:
  b. Swipe to the bottom of the page and go to Advanced settings.
  c. Tap on Account on your watch.
  d.Tap on Add account and follow the instructions, keep the Wear OS by Google app open in the foreground while copying your account to the watch for faster execution.

Any other issues
If the steps above did not work or in case of other issues:

1. Reset your watch to factory settings

If you watch is not yet paired (you cannot see a watchface yet on your watch):
a. Long-press the crown until the watch vibrates and open the settings.
b. Tap on Disconnect and reset.
c. The watch will restart.

If your watch is paired:
a. From the watchface, swipe down to open the Quick settings screen.
b. Tap on the setting icon at the top of the screen.
c. Tap on System > Tap on Disconnect and reset.
d. The watch will restart.

2. iOS users only

On your phone, go to Settings > Bluetooth and tap on the information button next to your watch name, on the right-hand side. Then, tap on Forget This Device and confirm. This operation is required to avoid causing problems every time you begin a pairing process.

3. Open the Wear OS by Google app.
4. Tap on the menu icon on the top left corner and then tap on Set up a new watch.
5. Pair again by following the pairing process.

If the above troubleshooting actions still don't work, please contact us https://www.tagheuer.com/int/en/contact/

Android, Wear OS by Google, Google, Google Play and the Google Play logo are trademarks of Google Inc.

The application needs to be controlled from the phone to function.
“ Find My Watch & Phone - Bluetooth Search” application allows establishing a Bluetooth connection between android device and android smartwatch or Android Wear smartwatch.
When Find My Watch & Phone - Bluetooth Search is configured on both devices, app will find your watch or wear.

Note: Application requires a phone device: For find your Android Wear devices you need to download phone companion app.
Connection status is displayed on watch and phone, application doesn't have alarm sound in search mode.

Guide
1. Install Find My Watch & Phone - Bluetooth Search from Google Play BOTH on your Smartphone and twatch device

2. Open Find My Watch & Phone - Bluetooth Search on your smartwatch. Click “Enable Bluetooth” and, after BT is enabled, click “Connect device”.

3. Find from the appeared list the bluetooth name of your watch device and connect it.

4. Press "Pair/Ok" on both your devices and confirm pairing devices, if needed (click ok/allow).
Done! Your android phone and android/wear watch are now connected!

The newly developed phonefinder & watch finder application will help you find your lost phone or lost smartwatch easier. 🤳🏻Connect the app to your smartwatch and smartphone and thus you can always find them.💪🏽 Here are the most useful features of the search phone application:

👉🏻“Find gadget” feature
👉🏻Choose sound volume
👉🏻Turn on vibration
👉🏻Screen brightness
👉🏻 Well-tuned interface

Our life is full of daily routines and troubles, so it is not surprising that we often forget about something. 📚💼👩‍👧‍👧 However, no one is immune from loss, forgetfulness, or unkind people. But you can find phone and search watch much easier if you have an phonefinder app.

“Search phone” feature on the watch
Download the search phone app, connect it to your watch and your phone and finally sync devices.📱⌚️Also, if you lose your watch, you can find it using your phone, because installing the phonefinder application on both devices, you link them. Press the “play” button to find phone or search watch and press the “stop” button when you find gadgets to turn off the alarm.🆗

Turn on sound in settings
The easiest way to find your phone is to use a beep.🎵 It is very loud and you can hear it even at a great distance. 🔊The volume of the signal gradually increases. In addition, if your phone is stolen, then the sharp signal will take the thief by surprise and intimidate and there is a chance that you will hear a signal if the thief is nearby.🏃🏻‍♂️🆘

Turn on vibration to find phone or smartwatch.
If you just constantly forget where you put your gadget, but usually it lies somewhere nearby or your children often take it to play and lose it in the house, then a loud signal is not necessary.📳 You can select the vibration function to find watch or your lost phone faster. Vibration will also be more appropriate at work, office or school.📵

Well-tuned interface
The interface and settings of the watch finder application are very simple, which will allow you to quickly react to search phone or find watch, since losing gadgets always brings stress and makes you nervous🤯😤, we made the ability to find watch or smartphone easier and more convenient for you.🧡

↘️Download a new smart phone & watch finder application↙️, find a lost phone or a lost watch easier and faster, control the location of your gadgets and no longer worry about having to buy new ones in case of loss. Finally solve the problem of losing your phone and smartwatch once and for all for free 💯

Why won't my Apple Watch Find My phone?

Try to connect your Apple Watch and iPhone again On your iPhone, make sure that Airplane Mode is off and that Wi-Fi and Bluetooth are on. To check, open Control Center. If you see the Airplane Mode icon on your watch face, Airplane Mode is on. Open Control Center, then turn off Airplane Mode.

How do I ping my iPhone and iPhone watch?

To ping your iPhone from your Apple Watch, swipe up from the bottom of the Watch face to open the Control Center and select the Ping iPhone icon (looks like an iPhone emitting noise). Your iPhone will emit a sound. If you don't hear the sound, your iPhone is not nearby or not connected to your Watch.