USB devices like Hard Drives, Pen drives, and Memory Card, etc. are the easy way to store and transfer data from one computer to another. These USB drives are portable and easy to handle, but sometimes you might face the Hard disk not detected a problem with Windows PC. This happen when the USB port did not recognize the external USB drives. When you try to access the data from the hard drive or USB device, you see the following USB Device Not Recognized error message: Show
“One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it for assistance in solving this problem, click this message.” इस पोस्ट को हिंदी में पढ़ने के लिए यहां क्लिक करें। Table of Content
How to fix External Hard Disk not Detected in Windows?Disconnect the power supplySometimes, a very simple trick can fix an external hard disk not detecting a problem. Follow the below steps to apply this trick.
Disconnect USB Device
Update USB Device DriversIf all USB ports are working fine then you need to check for the latest USB driver installed on the computer. Because sometimes old drivers can prevent the drive to connect to the PC and shows the hard disk not detected an error. To check driver status follow the below steps.
Change Drive LetterCheck whether you can see your external USB Drive in Disk Management, then rename or change the drive letter. To do this follow the below steps. 1. Right-click on This PC or My Computer and click on Manage. 2. Select Disk Management. 3. Right-click on the connected external drive and choose Change Drive Letter and Paths. 4. Click Add, and then assign a new drive letter from the drop-down list and click OK. Fix USB Root Hub
Change USB Selective Suspend Settings1. Go to Control Panel and click on Hardware and Sound. 2. Click on Power Options. 3. Select Change Plan Settings under preferred plans. Balanced (recommended). 4. Click on Change advanced power settings. 5. Expand USB settings and USB selective suspend settings. 6. Select Disable from the drop-down menu. 7. Click “Apply” and “OK” to save the settings.
Contact Data Recovery Service ProviderIf all the above-mentioned solutions don’t fix the external hard drive not detect the problem. And you are still getting the same error; then there are high chances that your hard drive has become dead. In this situation, you need to take the help of a Professional Hard Drive Recovery service provider. If your problem is resolved, then it is advised that you should take a backup of your hard drive data; to avoid any data loss in the future. Different situations of Hard Disk have not detected errorsHard drive not detected error/issue can be caused by the following situations:
If the problem still persists after implementing the above steps then possibility that your hard drive is severely corrupted or damaged. In that case, you can approach a reliable data recovery service provider. Why is my external hard drive not showing up?But in some cases, you may connect your drive to a Windows PC or another device with a USB port and find the external hard drive isn't showing up. This problem has several possible causes: partition issues on the external drive, using the wrong file system, dead USB ports, or driver issues in Windows.
What do I do if my hard drive is not detected?Ways To Fix Hard Drive Not Detected. #1) Check Hard Drive Cable Connection.. #2) Initialize And Format Hard Drive.. #3) Partition And Format Hard Drive.. #4) Assign A Drive Letter For Drive.. #5) Recover Data From Unallocated Hard Drive.. #6) Run Hardware And Devices Troubleshooter.. #7) Check For Driver Updates Manually.. |