Iso vg 100 hydraulic oil

Q: What does ISO mean in hydraulic oil?

ISO VG stands for International Standards Organization Viscosity Grade” and is reported in numbers ranging from 2 all the way up to 1500. This number is critical because a lubricants viscosity is the single most important factor when selecting the right oil for your machinery.

Home
Products
Product listing
2. Industrial Oils
Sewing Machine Oil SMO21060

Table of Contents Show

Hydra HVI Hydraulic Oil ISO VG 100
Why one should use Hydra HVI Hydraulic Oil ISO VG 100
Specifications
Performance Level
Contact Information
Do you know these New Maxoline products already?
Gear Oil Hycat 30
Hydra HVI Hydraulic Oil ISO VG 46
Regular Oil SAE 50
Line-up of our various packings
What does ISO VG 100 mean?
What is ISO 100 oil equivalent?
What does VG stand for in hydraulic oil?
What does ISO mean in hydraulic oil?

Hydra HVI Hydraulic Oil ISO VG 100

This product was rated through our customers

MAXOLINE HYDRA HVI hydraulic oil ISO VG 100 is a mineral oil based EP hydraulic oil containing a High Viscosity additive package for use in heavy duty hydraulic equipments which have to work under severe pressures. Produced from high grade solvent neutral base oils and suitable EP additive and anti-foam package.

Why one should use Hydra HVI Hydraulic Oil ISO VG 100

A High and stable Viscosity Index
A very good resistance against anti-foaming, wear and oxidation,
Fine anti-rust and anti corrosion properties,
Excellent performance at low and high temperatures

Specifications

Specific Gravity 15°C: 0,879
Viscosity 40 °C mm²/s: 100
Viscosity 100 °C mm²/s: 14,30
Viscosity Index (V.I.): 148
Flash Point °C: 212
Pour Point °C: -30
Acid number, mgKOH/g: 0,40
Sulphate Ash, %: 0,06

Performance Level

DIN 51524-3 HVLP

AFNOR NF E 48-603 HV

ISO 11158 HV

ASTM D 6158 HV

CAAO225/41062

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

Maxoline
The lubricants specialist from the Netherlands
- Fokkinkweg 19
- Hengelo Bronckhorst (Gld)
- 7255 AJ
- Netherlands
- T: +31 575 46 12 13
- F: +31 575 74 18 01
- E: This email address is being protected from spambots. You need JavaScript enabled to view it.

TIP!

Do you know these New Maxoline products already?

Gear Oil Hycat 30
MAXOLINE Gear Oil Hycat 30 formulated with solvent refined base oils is a special oil for hydraulic and transmission equipment. special developed for the lubrication of power shift transmissions, differentials, final drives and hydraulic equipment of earthmoving equipment, for which a Caterpillar TO-4 or Allison C4 fluid is required. NOT TO BE USED IN ENGINES!
- Show Details
Hydra HVI Hydraulic Oil ISO VG 46
MAXOLINE HYDRA HVI hydraulic oil ISO VG 46 is a mineral oil based EP hydraulic oil containing a High Viscosity additive package for use in heavy duty hydraulic equipments which have to work under severe pressures. Produced from high grade solvent neutral base oils and suitable EP additive and anti-foam package.
- Show Details
Regular Oil SAE 50
MAXOLINE Regular Oil SAE 50, also known as Commercial Motor Oil is a blend of HVI Base Oils. It is extremely resistant against aging. Suitable for general lubrication under mild conditions, such like bearings of pumping stations, circulating systems and for topping-up of certain classic cars engines.
- Show Details

Line-up of our various packings

NYBASE ISO VG 100 is a high viscosity speciality base oil for Group I replacement in industrial lubricants and neat metal working fluids. NYBASE ISO VG 100 is ideally suitable for the blending of high quality industrial lubricants like ISO VG 100 hydraulic oils, and ISO VG 100 industrial gear oils, as the viscosity and VI are well matching the requirements. With a high flash point and low volatility, it is also suitable for other demanding applications such as piston type air compressors ISO VG 100 (SAE 30). NYBASE ISO VG 100 can be used as a base oil in neat oils for metal forming fluid applications like heavy wire drawing of steel and aluminium, heavy duty stamping, and for cold steel extrusion. In metal rolling, as temporary protection fluids for storage of hot rolled steel products. NYBASE ISO VG 100 has metal treating fluid applications such as a tempering fluid at 150-220 °C. NYBASE ISO VG 100 is a specialty base oil, with extremely good low temperature properties. This is demonstrated by the low pour point and viscosity at low temperature. NYBASE ISO VG 100 also has high solvency for additives, and for any polar compounds formed during the usage of any lubricant based on NYBASE ISO VG 100. NYBASE ISO VG 100 is a high viscosity specialty base oil, suitable for the replacement of high viscosity Solvent Neutral Group I base oils.

What does ISO VG 100 mean?

NYBASE ISO VG 100 is a high viscosity speciality base oil for Group I replacement, with high Viscosity Index (VI), high Flash Point (FP) and excellent low temperature properties. Recommended for the formulation of industrial, automotive and metal working fluids.

What is ISO 100 oil equivalent?

SAE 10W is equivalent to ISO 32, SAE 20 is equivalent to ISO 46 and 68, and SAE 30 is equivalent to ISO 100.

What does VG stand for in hydraulic oil?

Now to the numbers: 22, 46 and 315 refer to the viscosity grade (VG) of the oil; 22 and 46 are ISO grades and refer to the oil's kinematic viscosity in centistokes at 40 degrees Celsius, plus or minus 10 percent. So, an ISO VG 46 hydraulic oil has a viscosity of between 41.4 and 50.6 centistokes at 40 degrees Celsius.

What does ISO mean in hydraulic oil?

ISO VG stands for “International Standards Organization Viscosity Grade” and is reported in numbers ranging from 2 all the way up to 1500. This number is critical because a lubricant's viscosity is the single most important factor when selecting the right oil for your machinery.