How to reset oil life on honda accord 2006

1. Turn the ignition to run (one position before starting engine).
2. Press the SELECT/RESET knob until the engine oil life indicator is displayed.
3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code(s) will will disappear, and the engine oil life will reset to 100.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

The Oil Change Light Reset Honda Accord 2006 2007 2008 2009 2010 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due.

Below is the Oil Change Light Reset procedure for the Honda Accord 2006 2007 2008 2009 2010 . Follow the steps below to reset the oil life monitor after each oil change.

Oil Change Light Reset Honda Accord 2006 2007 2008 2009 2010 Procedure

1. Turn the ignition to the “RUN” position.
2. Press the “SELECT/RESET” knob until the engine life indicator is displayed.
3. Press the “SELECT/RESET” knob for more than 10 seconds, the indicator and the maintenance code(s) will blink.
4. Press the “SELECT/ RESET” knob for 5 more seconds, the maintenance code(s) will disappear and oil life will be reset to 100.
5. Turn the ignition off.

Oil Viscosity and Capacity

The 2.4 liter engine holds approximately 4.4 quarts (4.2 liters) of 5W-20 oil when the engine oil and filter are changed.

The 3 liter engine holds approximately 4.5 quarts (4.3 liters) of 5W-20 oil when the engine oil and filter are changed.

The 3.5 liter engine holds approximately 4.5 quarts (4.3 liters) of 5W-20 oil when the engine oil and filter are changed.

The 2.4 liter engine holds approximately 4.2 quarts (4 liters) of 5W-20 oil when the engine oil and filter are changed.

Not Working?

If the oil change light reset procedure is not working to reset your oil life monitor, make sure you are following each of the steps exactly and in the order displayed in the Oil Change Light Reset Honda Accord 2006 2007 2008 2009 2010 procedure above. If this is not the oil life monitor reset procedure for your vehicle, restart your oil light reset procedure search HERE

Oil Life Monitor Reset Procedure Frequently Asked Questions

If you are still having trouble with visit the Oil Life Monitor Reset Procedure Frequently Asked Questions (FAQ) page for more information.

Notice

Due to the wide range of vehicles makes and models, this is general information and should not be taken as specific to any vehicle. Please consult the vehicle manufacturer for the correct specifications and repair procedures for your vehicle. This information is meant to be used as a guideline only.

This video will show you step by step instructions on how to reset your oil life indicator on a Honda Accord 2006-2007.

Indicators:

1. Turn the ignition to run (one position before starting engine).
2. Press the SELECT/RESET knob located in the instrument cluster, until the engine oil life indicator is displayed.
3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code will disappear, and the engine oil life will reset to 100.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
6.DONE!!! 😀

If you liked this video and found it helpful feel free to like, share, and comment to help us bring even better content.
For more oil reset and DIY maintenance tutorials, make sure to subscribe to our channel!

If you didn’t find what you were looking for, send us a message with the model and year of your car and we will get back to you shortly with the best answer we can find.

The 2006 Honda Accord is equipped with an On-Board Diagnostics (OBD) computer that reads trouble and maintenance codes from sensors throughout the vehicle. When the oil needs to be changed, an oil light illuminates on the instrument panel above the steering column. You should change the oil before you attempt to reset the code or else it will keep turning back on. But it is an easy fix that only takes a few minutes of your time from home. No special tools are required.

Step 1

Put the key in the ignition and turn the key to the "On" position. Don't start the engine.

Step 2

Look for the "Select/Reset" button above the steering column on the instrument panel. Push and release the button several times until the oil indicator light appears on the display. Hold the button in for at least 10 seconds. Release the button once the oil indicator light starts to blink.

Step 3

Press the "Select/Reset" button. Hold the button for 10 seconds or until the oil indicator resets itself to 100.

References

• "Honda Accord 2003-2007 (Haynes Repair Manual)"; Haynes; 2009

Things You'll Need

• Ignition key

Writer Bio

Katie B. Marsh is a self-published author, article writer, screenwriter, and inventor. After graduating from South Coast College of Court Reporting, she worked as a congressional and freelance court reporter for eight years. She began her writing career in 2005. Her content may be found on amazon.com, booksforsharing.com, and ezinearticles.com. She completed her first screenplay in October 2009.

How do you reset the oil life on a Honda Accord?

How do I reset the oil life on my 2007 Honda Accord?