Where is whirlpool refrigerator water filter located

How to Replace Your Refrigerator Water Filter

• The internal ceiling of the refrigerator
• Inside the refrigerator or freezer’s inside walls (perhaps behind drawers)
• When the door is opened, the frame behind it is visible. In the shadows of the kickplate
• It’s located on the back of the refrigerator.

A sample model number label looks like this:

Your refrigerator’s water filter works tirelessly to ensure that your drinking water is clean and tastes good at all times. It must be replaced on a regular basis in order to maintain its condition; we recommend changing it once every six months. It’s simple to locate your filter and replace it with a new one after you’ve found it. Continue reading to find out how to locate and change your Whirlpool ®refrigerator water filter quickly and efficiently.

Finding and replacing your fridge filter

The first step in replacing your refrigerator water filter is to determine what you already have. See whether it has a serial number printed on it or if it has an authorized water filter for your Whirlpool ®refrigerator Consider purchasing a subscription to have a new filter shipped to you automatically every three or six months once you’ve determined what sort of filter you have.

Select your water filter

Follow the easy replacement instructions described below or watch a video to learn how to change your Whirlpool ®refrigerator water filter. Select your filter from the items listed below to get started.

Filter 1: Step-by-step instructions

1. Look inside your refrigerator for the water filter cover, which should be in the top right-hand corner or in the base grille. Open the filter door by lifting it up. Remove the filter and toss it in the trash
2. Remove the protective covers from the O-rings on your new filter and set them aside. It is important to check that all of the O-rings are still in place once the lid has been removed. When placing the new filter into the slot, ensure sure the arrow on the filter is facing in the direction of the slot. Do not pressurize the water filter in any way. In case it is difficult to slip into the grooves, twist it until the notches are properly aligned with the grooves. Close the filter door by pressing it down until it clicks into place. Once your filter has been changed, pour four gallons of water down the line to ensure that the new filter is fully flushed.

Filter 2: Step-by-step instructions

1. Inside the refrigerator, look for the water filter lid in the top right-hand corner. Open the filter door by pulling it open. Make a slanting motion with the filter, then turn it to the left and pull it. Remove the old filter and throw it away. Remove the protective covers from the O-rings on your new filter and set them aside. It is important to check that all of the O-rings are still in place once the lid has been removed. It is important to make sure that the arrow on the new filter points upward when it is placed in the filter slot for the first time. The filter will begin to rotate as soon as you press it in. Turn the filter counter-clockwise until it locks in place. Close the filter door by pressing it down until it clicks into place. Once your filter has been changed, pour four gallons of water down the line to ensure that the new filter is fully flushed.

Filter 3: Step-by-step instructions

1. Look for a little plastic cap that fits over your water filter on the left side of the refrigerator’s base grille. To release the filter, use the eject button on your keyboard. Remove the filter and toss it in the trash
2. Remove the protective covers from the O-rings on your new filter and set them aside. After the lid has been removed, check to see that the O-rings are still in place. Place the filter cap on the replacement cartridge in such a way that the ridges are in alignment. To secure the cap in place, turn it counterclockwise. Check to be that the arrow on the new filter is pointing to the left before placing it into the slot. Push the filter all the way in until the eject button pops back out of the filter
3. Once your filter has been changed, pour four gallons of water down the line to ensure that the new filter is fully flushed.

Filter 4: Step-by-step instructions

1. Water filter cover may be found on your refrigerator inside in the top right-hand corner of the compartment
2. If the filter tab on your refrigerator is pointing outward, press down on it and the lid will come off automatically. Alternatively, if you have a tab on the bottom of the cover, you may pull forward and down on the little lever to open it. Pull the filter to the left as you turn it. Remove the old filter and throw it away. If this is your first time installing the filter, you’ll find a cap within the filter slot to help you out. Turn it counterclockwise and pull it out
3. It should come out easily. For proper placement of the new filter in the slot, align it with the grooves, push it in, and rotate it to the right. To secure the filter in place, press up on it. Activate the filter door by pushing it up until it clicks shut
4. Once your filter has been changed, pour four gallons of water down the line to ensure that the new filter is fully flushed.

Need your model number?

Depending on the model, Whirlpool® refrigerators will show the model number in a variety of locations. Consult our guide to discover where to find yours.

More cleaning tips and tricks

Are you ready to learn more about home hacks, appliance advice, and more?

Was this article helpful? Pass it on

This item has been added to the comparison list, which can be found at the bottom of this page.

The water filters in your Whirlpool refrigerator should be updated every six months. Water from the refrigerator may begin to taste odd and seem murky if you leave it for any longer than this. Ice will begin to smell, and you may detect black particles in the water if you leave it for any longer. It is also possible that an out-of-date water filter will have an effect on the water flow, causing water to slowly dribble out and smaller blocks of ice to be generated. Replacement of the water filter in your Whirlpool refrigerator is a straightforward procedure that should not necessitate the use of any special tools or skills.

Installing the incorrect water filter will almost certainly result in the filter not being able to connect to your refrigerator’s main water line.

Step 1: Locate Your Water Filter

The position of the water filter in your Whirlpool refrigerator is determined by the model number of your appliance. The water filter will be situated either in the grille at the base of the refrigerator or within the refrigerator in the top right rear corner, depending on the model. Please refer to your refrigerator’s handbook if you are unable to find where the water filter should be located.

Step 2: Preparation

Put down a towel before removing the water filter in case there is a little amount of water leakage. For refrigerators with filters, you may want to remove any food or beverages that may be in the way before cleaning it out. Replace the water filter when the ice maker is off in your refrigerator. If the ice maker produces ice while you are replacing the water filter, water may run out of your refrigerator. It may be necessary to switch off the water supply to the refrigerator before replacing the filter on some older models in order to minimize water spillage during the process.

When it comes to changing the water filter, it should not be necessary to have access to any electrical components, and therefore it should be safe to do so without disconnecting the power.

Step 3: Remove the Water Filter

It should be possible to remove the old water filter if the water filter is positioned in the grille of your refrigerator. To do so, you should be able to push firmly on the button located to the left of the water filter, which should cause the old filter to be released. If your refrigerator does not have a button to press, twisting the filter counterclockwise by a quarter turn should be sufficient to remove it from the refrigerator. According to the model, you may also need to press in on the filter while spinning it in order to remove the old filter.

There are three options for getting access to the water filter cover: releasing the tab to draw the water filter cover down, lifting the water filter cover, or pressing down on it with your finger.

You should be able to easily remove the old water filter from the refrigerator when it has been freed.

Step 4: Install the New Filter

Whirlpool refrigerators with water filters positioned in the grille include a color-keyed cap that must be unscrewed from the old filter and fitted into the new filter before the refrigerator can be used again. In the event that you have this sort of filter, be certain that the cap has been moved to the new water filter before proceeding. The job of installing the new water filter should be straightforward. Replace the old filter with the new filter by sliding it into the water filter slot on the back of the filter housing.

Make certain that the new filter is installed in the same orientation as the prior filter.

Before continuing, double-check that the filter is securely fastened in place and/or that the water filter lid is closed.

Step 5: Flush Out the System

Before you drink the water, you must first flush the system with water to clean it out and eliminate any carbon fines as well as any trapped air that may have accumulated. It is recommended by Whirlpool that four gallons of water be sent through the system once the filter has been changed. To save time, fill up a one-gallon jug with water and dump it out four times before using it. After you’ve finished flushing the system, you may sit back and enjoy a refreshing glass of freshly filtered water that you’ve earned.

Alternatively, if your refrigerator has a “change filter” light, you may reset it by pressing the button on the refrigerator. You should remember to switch on the water supply again now that the new filter has been fitted if you had shut it off before installing the filter.

Refrigerator FAQ: How to Change Whirlpool Refrigerator Water Filter

While the water filter in a Whirlpool refrigerator can offer clean, fresh drinking water, it is not designed to last indefinitely. What is the best way to determine whether or not the filter needs to be replaced? A unpleasant smell or taste in the filtered water might be a typical indicator of a problem. Learn how to change the water filter in your Whirlpool refrigerator using simple steps, how often it should be changed, and how to troubleshoot any issues you may be experiencing.

Why, When, WhereHow to Change Whirlpool Refrigerator Water Filter

Despite the fact that replacing a water filter is easy and basic, not understanding the fundamentals behind it might result in this vital refrigerator maintenance task being overlooked. We’ll go over how to change the water filter in a Whirlpool refrigerator, as well as why it’s required, when it should be done, and where to find the filter.

Do I Really Need to Change my Refrigerator Water Filter?

One of the few methods to assure clean, fresh drinking water is to change the filter on a regular basis. Over time, the particles and impurities that are filtered out by the filter will clog the filter, rendering it unable to perform its intended function. The result is that these contaminants do not pass through the filter and remain in the drinking water. Here’s how to know when it’s time to replace your refrigerator’s water filter:

• The water from the refrigerator has an unpleasant flavor
• A peculiar odor emanates from filtered water. When water is discharged, the pressure of the water lowers.

How Often Should I Replace My Whirlpool Water Filter?

Changing the filter every 6 months should keep bad-tasting water and low water pressure at a bare minimum. However, the frequency with which you should replace your refrigerator’s water filter is determined by the pace at which it flows and how frequently it is utilized. More frequent replacements may be required because to increased usage and quicker flow rates.

How Do I Change My Whirlpool Water Filter?

Water filters for Whirlpool refrigerators can be located in the top right-hand corner of the refrigerator’s interior or beneath the base grille, depending on the model. Others filters are twist-in types, some others are push-in models, and some are both. Check your refrigerator’s use and care handbook to find out where your filter is placed and which kind of filter you need to use with your refrigerator. Here’s how to replace the water filter in your Whirlpool refrigerator in eight simple steps:

1. In most cases, the water filter may be found either in the top right-hand corner of your vehicle’s cabin or behind the base grille. The compartment or cover must be opened, which may entail raising the compartment door up or pushing the cover down. Base grille filters may be equipped with an eject button that allows the filter to be removed. Removing and discarding the old filter may need twisting it counterclockwise or pulling it straight out, depending on the filter model. Disassemble the new filter: if the filter contains O-rings, remove the protective cover while making sure the rings are still in place
2. Open the new filter
3. And test it. Check that any arrows or grooves on the new filter are properly aligned before inserting it into the slot Filters should be secured in place by twisting them in a clockwise direction until they are secure, while others should be pressed in until they are secure. Close any compartment doors and make sure they’re securely fastened in order to keep the filter safe and clear of dirt
4. And Dispense and discard 4 litres of water in order to cleanse the filter of any leftover pollutants
5. Flush the filter

Whirlpool is the source of this image.

What Do I Do if My Whirlpool Refrigerator Water Filter is Stuck?

Whenever this occurs, first double-check your user handbook to ensure that you’ve followed all of the correct switching steps. Depending on whether the filter is stuck or not, there are various treatments for both the base grille and inside filters. When your base grille Whirlpool refrigerator water filter becomes stuck, use these troubleshooting steps:

• Make certain that any eject buttons are pressed all the way in to completely disengage the filter before using the machine. Twist-in versions should have the filter cap covered with a piece of cloth, and the filter cap should be turned one-quarter turn using pliers.

An internal filter that has been trapped can be resolved as follows:

1. Make sure that the water compartment door is entirely open to provide for ample space to remove the filter before starting. It is possible that you may need to remove a refrigerator shelf in order for the door to open correctly. In addition, a buildup of water pressure might make it difficult to remove the filter. Reduce any water line pressure that may exist by shutting off the refrigerator’s water supply and dispensing any remaining water in the line.

Whirlpool refrigerator repair is our specialty. Experts in Columbus can answer any query, from how to change the water filter in a Whirlpool refrigerator to worries about a problem. For all of your kitchen appliance requirements, contact Capital City Appliance Service!

Amazon.com: everydrop by Whirlpool Ice and Water Refrigerator Filter 2, EDR2RXD1, Single-Pack : Appliances

a rating of one out of five stars FRAUD – A TDS tester determined that my tap water was superior (see photo) The document was reviewed in the United States on January 2, 2019. I, too, utilized a TDS (total dissolved solids) testing on my tap water in Southern California before using this filter, as had a former user before me. I’ve included a snapshot of the finished product. In a nutshell, what exactly am I paying for? My tap water performed far better than this filter. This is a complete and utter waste of money, as well as a deception.

One of my children is one year old, and he was consuming formula that had been combined with the water from this filter. They provided him with “Marginally Acceptable” water just for the purpose of making a profit!

Top reviews from the United States

On January 2, 2019, a review was published in the United States of America. I, too, utilized a TDS (total dissolved solids) testing on my tap water in Southern California before using this filter, as had a former user before me. I’ve included a snapshot of the finished product. In a nutshell, what exactly am I paying for? My tap water performed far better than this filter. This is a complete and utter waste of money, as well as a deception. I’m definitely contemplating sending this photo to our local news station for use in one of their “Fraudulent Products” reporting pieces in the future.

1. They provided him with “Marginally Acceptable” water just for the purpose of making a profit!
2. I, too, utilized a TDS (total dissolved solids) testing on my tap water in Southern California before using this filter, as had a former user before me.
3. In a nutshell, what exactly am I paying for?
4. This is a complete and utter waste of money, as well as a deception.
5. One of my children is one year old, and he was consuming formula that had been combined with the water from this filter.
6. The photographs in this review verified purchaseReviewed in the United States on January 8, 2019Verified Purchase It was with some reluctance that I placed this purchase because our semi-new refrigerator indicated that we needed to replace the filter.
7. To find a company that sells replacement filters, we’re compelled to explore and investigate for a suitable alternative.

After you’ve spent a several thousand dollars on a new refrigerator that incorporates a water filter, you’ll be required to spend an additional $45 or more every few months for filters for the rest of your life.

I was mortified.

The lesson has been learnt.

“Compatible with Filter 2 Refrigerator Water Filter W10413645A W10413645 Kenmore 9082 (1-Pack) Sold by: apluschoice” is a more reasonably priced and functional alternative.

Purchase that has been verified Instead of reviewing the goods, I’m writing a review on the listing itself.

Already, the fact that I supplied the necessary information for the filter parameters I required and this filter was shown is a source of concern.

We do not want four photographs of the packing; instead, we require a picture of the filter.

This is just moderately passable for a water filter, and it appears to me to be a complete rip-off for such an expensive device.

57 is good enough water for me to drink, but not 310 when the filter is brand new and only becoming worse over time.

On March 2, 2018, a review was conducted in the United States.

This is just moderately passable for a water filter, and it appears to me to be a complete rip-off for such an expensive device.

57 is good enough water for me to drink, but not 310 when the filter is brand new and only becoming worse over time.

Purchase that has been verified These filters are an absolute waste of money considering what you receive in return.

It takes around 8-10 liters of water to clear the cloudiness from the filter after it’s been changed, and by that time, your filter has degraded to approximately 90 percent, according to the refrigerator.

I am quite dissatisfied with this product, and if I had known about the problem, I would not have purchased it.

On March 21, 2020, a review was conducted in the United States.

The first few quarts delivered by the in-door dispenser were foggy at first, but after being left to stand for a few minutes, the cloudiness disappeared rapidly since the cloudiness is actually extremely small air bubbles.

I was able to’reset’ the automatic reminder on our refrigerator several times (by removing and immediately reinstalling the same filter) before replacing the filter with a new one when the flow decreased by approximately 50%.

(See the photographs that have been posted.) An analogy may be drawn between this and a “finishing” filter in a RO system.

As a result, I gave it three stars.

muttering, grumbling, grumbling:) 3.0 stars out of 5 for this product Although it is expensive, it is a good performer.

On March 22, 2020, a review was conducted in the United States.

The first few quarts delivered by the in-door dispenser were foggy at first, but after being left to stand for a few minutes, the cloudiness disappeared rapidly since the cloudiness is actually extremely small air bubbles.

I was able to’reset’ the automatic reminder on our refrigerator several times (by removing and immediately reinstalling the same filter) before replacing the filter with a new one when the flow decreased by approximately 50%.

(See the photographs that have been posted.) An analogy may be drawn between this and a “finishing” filter in a RO system.

As a result, I gave it three stars.

muttering, grumbling, grumbling:) On July 1, 2018, a review was conducted in the United States.

Unfortunately, that’s the only thing that works for our refrigerator at this point in time.

We normally buy a half gallon and only use it for a few days.

To be honest, we just keep using it even after it says it’s finished because the water continues to taste good for a long.

Or perhaps we’re simply really cheap, to put it mildly.

Purchase that has been verified It’s important to take negative evaluations with a grain of salt.

The first gallon of water I flushed down the toilet was AWFUL. The water was gloomy, and there was a lot of debris floating about in it. After the fourth gallon, the water was running clean and clear, and the flavor of the water was excellent.

Top reviews from other countries

4.0 stars out of 5 for this product carries out its responsibilities Purchased on April 17, 2019 in Canada and reviewed on April 17, 2019 I believe it is effective; I am not familiar with the differences between goods because this is the one that Frigedaire employs. They are a little expensive, but they are all around this price. One particularly inconvenient aspect is that you must set aside 20 minutes of each day to filter out the new filter. There will be a need to fill a blender full of water 18 times (as advised), so pull up a chair between the fridge and the sink and relax.

1. Purchased on January 11, 2021 in Canada and reviewed on January 11, 2021 The filter is OK, however I was under the impression that, given the price and the photographs supplied, there would be two filters in the packaging instead of one.
2. The $20.00 error will undoubtedly improve the readability of the description.
3. On March 15, 2016, a review was conducted in Mexico.
4. Because it has only been in use for 3-4 months and is just now beginning to display this situation, the “value” that it provides is significantly higher.
5. 3.0 stars out of 5 for this product It is required for the use of the refrigerator, but it is quite expensive and only lasts a short period of time.
6. It is an extremely expensive element for the amount of time it lasts.
7. Disappointed Purchased on July 12, 2019 in Canada and reviewed on July 12, 2019 I followed the suggestions, but the sky remained hazy.

Amazon.com : whirlpool refrigerator water filter

THE RESULTSPrice and other information may differ depending on the product size and color selected. A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. SponsoredSponsored This advertisement is being displayed to you because the product is relevant to your search query.

EXCELPURE UKF8001 Replacement for Whirlpool FILTER 4, EDR4RXD1, 4396395, WRX735SDBM00, RWF0900A, EFF-6007A, MFI2568AES, MFI2569VEM, RFC0900A, WF295, PURICLEAN II, Refrigerator Water Filter, 4PACK

SubscribeSave allows you to save even more money. With the SubscribeSave discount, the price drops to $54.15 USD. With the SubscribeSave discount, the price drops to $47.49. With the SubscribeSave coupon, the price drops to $56.98. Sketch was used to create this design. Sponsored With the SubscribeSave discount, the price is $26.59. A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent.

You may have it as soon as Thursday, March 17th. Shipping is $11.27. With the SubscribeSave discount, the price drops to $54.15 USD. A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. With the SubscribeSave discount, the price is $44.65.

ICEPURE UKF8001 Compatible with Whirlpool EDR4RXD1, 4396395, Maytag UKF8001, UKF8001AXX, EveryDrop Refrigerator Water Filter 4, RFC0900A, UKF8001AXX-200, UKF8001P, 469006, PUR, Puriclean II, Pack of 3

$17.99 when you sign up for our newsletter Save money with a discount A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. SponsoredSponsored This advertisement is being displayed to you because the product is relevant to your search query.

Refresh Replacement Refrigerator Water Filter for Whirlpool EDR6D1, 4396701, 4396702, WF293, EDR6D1, Filter6, L200V, LC200V, 2301706, RWF2000A, EFF-6001A, SGF-W10 and Kenmore 9915, 46-9915 (2 Pack)

Ships to the Netherlands are available. Only 7 of these items are left in stock – purchase soon. SponsoredSponsored This advertisement is being displayed to you because the product is relevant to your search query.

AQUA CREST 4396508 Replacement for Whirlpool 4396510, EDR5RXD1, NLC240V, PNL240V, 4396508p, 4396547, 4392857, 9010, LC400V, WF-NLC240V, 46-9010, Everydrop Filter 5 Refrigerator Water Filter

Ships to the Netherlands are available. Typically, orders are shipped within 4 to 5 weeks. With the SubscribeSave coupon, the price drops to $34.19 A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. With the SubscribeSave discount, the price is $26.59. A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. SubscribeSave allows you to save even more money. With the SubscribeSave discount, the price drops to $9.49. Ships to the Netherlands are available.

SubscribeSave allows you to save even more money.

With the SubscribeSave discount, the price drops to $47.49.

This advertisement is being displayed to you because the product is relevant to your search query.

Refresh Replacement Refrigerator Water Filter for Whirlpool EDR6D1, 4396701, 4396702, WF293, EDR6D1, Filter6, L200V, LC200V, 2301706, RWF2000A, EFF-6001A, SGF-W10 and Kenmore 9915, 46-9915 (3 Pack)

Ships to the Netherlands are available. There are only 8 left in stock, so place your purchase now. SubscribeSaveBrands relevant to your search will help you save even more money.

Whirlpool Refrigerator Water Filters: Ship Same Day – FridgeFilters.com

Netherlands is a destination for shipments Please place your purchase as soon as possible. SubscribeSaveBrands connected to your search will allow you to save even more money.

Whirlpool 4396841, 4396710 and W10193691 Whirlpool EveryDrop EDR3RXD1 (Filter 3) Ice and Water Refrigerator Filter

Descending Direction of 7 Items in a Set View asGridListShop byShopping OptionsBrandView asListView asGridList Media for the Primary Filter the media used as a primary filter It is possible to extend the life of a filter (gallons)