March 12, 2021
When someone suffers a sudden cardiac arrest, it is crucial an Automated External Defibrillator (AED) is used quickly to help save their life. Statistically, if someone is shocked within one minute of suffering sudden cardiac arrest, they have a 90% chance of survival. Each minute after decreases that person’s chances of survival 10%. This is why it is crucial AEDs are EVERYWHERE!
It is very important to remember you do not need medical
training to use an AED. Anyone can use one. Just turn it on and follow the step-by-step instructions. You cannot hurt someone with an AED. It will not deliver a shock to a person that does not need one.So, how do you use an AED? Actually, it is really simple. The following steps will walk you through exactly what to do when you need to
use an AED to help save a life!If a person is unresponsive, unconscious, and not breathing normally, they need an AED. Use the AED is soon as it arrives. The quicker it is used, the higher the chances of survival.
Step 1:
Power on the AED. Our
Lifeline AEDs have a very clear, green “on” button. Once you press the button, the machine will start talking to you. It will first tell you to “call for help.” If you have not called 9-1-1 yet, call 9-1-1 immediately.Step 2:
Next, the AED will tell you to “remove pads from package in back of unit.” Defibtech AEDs make the pads easy to find! Just turn the machine around and you will see the
defibrillator pads pack in the back of the unit.Step 3:
The AED will now tell you to “apply pads to patient’s bare chest as shown.” It is important that the patient’s chest is completely bare. The pads cannot be placed over any type of clothing. The pads have pictures on them. When you tear open the defibrillator pads package you will see one picture showing a pad on the right side of the patient’s chest underneath the collar bone. The other picture will show a pad being placed on the person’s left side, under the armpit. Place the pads firmly as they are shown in the pictures.
Step 4:
Once the AED pads are placed correctly the machine will say, “analyzing heart rhythm, do not touch the patient.” It is important to make sure no one is touching the patient at this time. Look up and down the body. Loudly state, “Stand clear.” If the machine determines a shock is needed, it will say, “Shock Advised. Charging. Stand Clear.” Again, look up and down the body. Loudly state, “Stand clear.”
Step 5:
Once the machine has finished charging, it will say, “Press flashing shock button.” Defibtech AEDs have a bright shock button found on the front of the unit. Press this button when it is flashing and the AED tells you to.
Step 6:
Once you deliver the first shock, the machine will say, “Shock one delivered. It is safe to touch the patient. Begin CPR now.” You can now provide CPR to the person. NEVER remove the pads. Perform
CPR with the pads still on the body. You will hear a metronome that will give you the perfect beat to provide chest compressions. The AED will allow you to provide CPR for two minutes. After two minutes that machine will re-analyze and determine if a second shock is needed. This process will continue until EMS arrives.Every situation is different. If the AED is used very quickly, one shock might bring the person back to being responsive and breathing. If this happens, you do not need to
provide CPR, but you need to monitor the person until EMS arrives. The person might go back into cardiac arrest again, if this happens, start CPR immediately.Other situations might require multiple rounds of CPR, multiple shocked from the AED, and medication administered by EMS to bring the person back.
Now you know the basic
steps to using an AED. Remember, the most important step is to turn the machine one and listen to the step-by-step instructions it will give to you.To learn more about Defibtech and to join us on our quest to save lives from
sudden cardiac arrest, visit www.Defibtech.com.