A NATURALLY SAFE WAY TO CLEAN IS POSSIBLE.With a bucket of hot water, a mop, Murphy® Oil Soap, or another natural cleaner that is safe to use on laminate, you can clean laminate wood floors.
Silky Terrier Dog Breed Playing Aro...
Please enable JavaScript
Silky Terrier Dog Breed Playing AroundTable of Contents
- What is best to clean laminate floor with?
- How do you get Murphy Oil Off laminate flooring?
- What kind of soap do you use on laminate floors?
- What not to use to clean laminate floors?
- Are Swiffer wet pads safe for laminate floors?
What is best to clean laminate floor with?
Using a gallon of hot water and a cup of white vinegar can remove a thin film or waxy buildup from your floor that has formed over time due to the incorrect use of cleaning products. The film can be broken down with vinegar, a natural cleaning agent, without harming the laminate surface.
How do you get Murphy Oil Off laminate flooring?
The vinegar and water mixture can be used in a spray bottle to clean the floors, one section at a time, as you work your way across them. Wipe the surface with a wet rag after it has been sprayed. A bucket of warm water and about a half cup of vinegar will do the trick, too.
What kind of soap do you use on laminate floors?
Using laminate-specific cleaning products is the most effective strategy for keeping floors free of stains. As an alternative, a teaspoon of unscented clear dish soap mixed with a gallon of water works well for cleaning laminate floors. Baby shampoo in a gallon of water can also be used. Avoid drenching the floors with water.
What not to use to clean laminate floors?
The use of steel wool, abrasive cleaners, or strong ammoniated or chlorinated type cleaners is discouraged. No buffing or polishing machines should be used on laminate floors. Ice the spot to make it more difficult to remove and then use a plastic scraper like a credit card to scrape it off.
Are Swiffer wet pads safe for laminate floors?
There are wet Swiffers that are safe for laminate floors. Using a wet Swiffer or Swiffer Wetjet on laminate floors is possible. Forte recommends the wet Swiffer for cleaning small spaces quickly.
NATURALLY SAFE CLEANING IS POSSIBLEWith a bucket of hot water, a mop, Murphy® Oil Soap, or another natural cleaner that is safe to use on laminate, you can clean laminate wood floors.
Silky Terrier Dog Breed Playing Aro...
Please enable JavaScript
Silky Terrier Dog Breed Playing AroundTable of Contents
- How do you use Murphy’s Oil Soap on laminate floors?
- What is the best way to clean laminate floors?
- Is Murphy’s oil soap good for wood laminate floors?
- Can you use oil on laminate flooring?
How do you use Murphy’s Oil Soap on laminate floors?
In addition to using a vacuum to remove dirt, you can also sweep the floor or use a dry mop to clean laminate flooring. Then, use an oil soap to remove dirt and grime from the laminate’s surface, which has a tendency to have small grooves.
What is the best way to clean laminate floors?
Using a Swiffer spray mop or a damp microfiber mop is the best way to clean laminate flooring throughout an entire room. Dirt and grime are easily removed with these, and no streaks or puddles are left behind. Fabric softener can leave a residue on the floor the next time you use a reusable mop head.
Is Murphy’s oil soap good for wood laminate floors?
All finished hardwood, ceramic tile, laminate, and vinyl floors can be cleaned with Murphy Oil Soap. If they use it on a regular basis, it will not harm them, but rather extend their lives. Before cleaning, all you have to do is thoroughly rinse your mop.
Can you use oil on laminate flooring?
Streaks and residue can be left by oil-based cleaning products, which can also harm the floor’s protective sealant. Laminated flooring can be cleaned by using a mop or microfiber cloth, rather than directly on the surface of the laminate. Laminate floors should never be waxed or polished.
The simple answer is that Murphy’s Oil Soap doesn’t do what people think it does. It is marketed as a wood floor cleaning product that has the ability to both clean and shine your floors. This is a major appeal to many people because it does multiple things at once. It cleans your floor AND leaves it looking shiny again. Makes sense as to why so many people have a bottle of it under their kitchen sink or in their laundry room. Let's just peel the Band-Aid off quick with this one by saying, you need to stop using Murphy’s Oil Soap to clean your wood floors today.But everyone swears by the stuff and all of the blogs I’ve ever seen recommend it? They can't all be wrong, can they?
We hate to be the bearers of bad news but the simple truth is, yes, they are wrong and all of those bloggers don’t really understand the product or more likely than not, have never worked with it long-term. Many of these people who advocate for MOS (Murphy’s Oil Soap) understandably associate cleanliness with shininess, add in a nice smell and you’ve got something you can sell to people no matter what it does or doesn’t do. Market any product long enough with a certain message and the truth about it doesn't really matter because it’s all about what people think/believe it does (this principle of course extends far beyond floor cleaning products).
A good analogy for this would be soda. Companies like Coke Cola and Pepsi claim that soda is refreshing and while it may taste good and be fizzy, the truth is that all forms of soda contain caffeine which is a diuretic that leaves your body significantly more dehydrated after you drink it. At this point, you’re surely wondering, what’s the exact correlation between Murphy’s Oil Soap and soda? Well, here it is, it’s consumer manipulation through marketing.
Murphy’s Oil Soap along with many other famous floor cleaning products (that we are going to cover in future posts) have spent fortunes on positive marketing for their products over the course of decades. In MOS’ case, they have been advertising their floor cleaning oil since the founder, Jeremiah Murphy, bought the formula from a German immigrant in 1910. That means they have been marketing their product for 112 years at this point in time. With this in mind, it should come as no shock that many are surprised to learn about the kind of damage that MOS will inevitably and unwittingly cause.
What are some of the signs of Murphy’s Oil Soap damage?
It's important to be able to identify MOS damage, especially if you are looking to purchase a new home that has wood floors installed in it. Many sellers or agents will do the bare minimum to ‘shine up’ a floor to help it sell faster and for more. This section should give you the information you need to avoid that kind of disaster in the future. We’ll also provide an alternative solution to drum sanding your floors back to bare wood that is far more economical. Let's dive in.
1. The floors just look greasy all the time.
If your fighting a greasy glare on your wood floors then our professional diagnosis is that you’re suffering from MOS damage. This is a simple explanation because it only relies on an understanding of the concept of evaporation. MOS comprises Sodium hydroxide, Water, Sodium tallate, Citronella oil, Lauramidopropylamine oxide, and Tetrasodium EDTA. The chemical names don’t matter exactly but it is important to note that Citronella oil, a vegetable oil, is a listed ingredient. It does not represent a large percentage of MOS but it is present. The reason this is important is because of the way MOS works. It is a water-oil emulsion that is temporarily stable, meaning that in its liquid state oil is suspended in water. Once, the MOS is applied to the floor, the water in that compound begins to evaporate. Once, the water evaporates off the floor or “dries” then all that remains are the other chemical ingredients found in MOS. Essentially this all just means, that every time you put down MOS you are leaving a shiny but oily residue on the floor especially if MOS is not properly diluted, which it typically isn’t.
2. They feel sticky and I can never seem to get them fully clean.
Here is what another wood floor specialist said in regard to someone asking about why MOS seemed to be leaving their floors dirtier rather than cleaner and they were noticing blemish in the polish,
“Okay... This is going to get ugly. I'm sorry to say but Murphy's Oil soap is NOT ALLOWED on finished wood floors. The only time Murphy's Oil soap is allowed on wood (I know, Right? It says it’s allowed on the bottle so you will buy it) is when the wood is WAXED like pews in a church or some other old-fashioned wax-based finish. Murphy's Oil soap has RUINED millions of square feet of wood flooring. And I mean millions and millions of square feet. I'm waiting for someone who will start a class-action lawsuit against them. And I'm not kidding about that. I really am waiting for it.
First off, Murphy's Oil soap is an oil-based polish. It leaves OIL on the floor (the water evaporates... the soap and oil residue does NOT). This oil can and WILL penetrate THROUGH the floor’s polyurethane finish and onto/into the wood. The worst that can happen: your floors will never take more finish again... ever. Murphy's Oil Soap is a contaminant... Think of it just like a gallon of cooking oil that has been left to soak into the wood. The hardwood grabs the oil and holds onto it. When you try to get a new finish (polyurethane) to grab the wood, it simply can't... because the oil is blocking the polyurethane from properly adhering. Now you have what is known as a chemical adhesion failure.
My recommendation is that you pay to bring in a flooring professional to take off the Murphy’s Oil Soap with their machines and chemicals. I guarantee you that they will have seen this once or twice. Pay them to remove whatever is on there. And then throw it out, or better yet send the remains of the bottle to the manufacturer with your repair bill asking for a refund and compensation. It's your choice... But I for one am getting tired of seeing this over and over again (think DECADES of these exact same issues).” – S.J. McCarthy, Houzz Professional
3. Discoloration and dullness.
This phenomenon typically begins to reveal itself over the course of months or years. Your floor will seem fine until one day when it isn’t. Here’s what’s happening to your floors when they start to discolor and become dull. Basically, it goes like this, as you apply a fresh layer of MOS in an attempt to clean your floors you are actually locking in a new layer of dirt and grime that is now encapsulated in and under the MOS finish. Do this enough and it becomes layered like an onion. A layer of MOS, a layer of grime, a layer of MOS, a layer of grime, and so on. The result is that the wood grain and color of your floor gets duller, darker, and dirtier as you fruitlessly attempt to clean it.
Here is another flooring professional’s astute opinion on the matter,
“Polish. It is one of my least favorite words in our industry! I am specifically talking about the floor-cleaning chemical solutions that most unassuming homeowners or housecleaning companies apply to hardwood floors to “shine them up”.
In their defense, companies that sell polish directly to the general public in grocery and home improvement stores do say in their instructions that their polish should be applied by a wood floor professional. Unfortunately, most folks figure it can’t be that difficult—after all, they took woodshop in high school or they’ve painted their walls before. The problem is, no polish or oil should be applied to your wood floor unless recommended by both your hardwood floor contractor AND the company that manufactures the finish that was applied to your floor.
If you don’t know what the finish is, stick with vacuuming or sweeping your wood floors and then clean occasionally with a spray bottle of water and a mop that has a terry cloth or microfiber pad. time—even as little as one or two applications—polish leaves an acrylic residue that cannot be removed from your hardwood floor by other cleaners. The only way acrylic residue can be removed is by hiring a professional who will either deep clean and mechanically or chemically etch your existing wood floor finish and then apply a new coat of finish or hiring a professional who will sand your floors down to the raw wood.” – Joni Rocco, Artistic Floors by Design
4. Whenever I sweep or mop the floor it feels like I’m fighting it.
This is because as you apply more MOS, the oily residue begins to build up and create surface tension which in turn makes the floor harder to maintain and keep clean. Inevitably, many solve this by applying another coat of MOS but sadly the original sin has already been committed if you are applying MOS in the first place. There are a few options when it comes to correctly removing it without irreparably damaging the functionality of your floor system.
If you have a bottle of Murphy’s Oil Soap hidden away that you use to clean your hardwood floors, stop using it today. You can use it for other projects like furniture or cabinets but never for wood floors. Period.
- - -
Curious to see what it looks like when we remove it from a wood floor? Wonder no more! Scroll down and watch the video of us cutting through the Acrylic Wax build-up and immediately and effortlessly removing it from his client's home. She was shocked by the results!
Your best solution to the MOS problem.
If you know the damage is only on the surface, yet many of your boards are still in good condition, it is better to repair the flooring instead of replacing the whole of it. Even so, a professional must evaluate your floor before deciding whether to repair or replace it.