I locked my keys in my 2014 Ford fusion and do
not know the factory code to use on keyless entry.
What should I do? is there a main code I could try
Your Answer:
Looking for a Used Fusion in your area?
CarGurus has 17,549 nationwide Fusion listings starting at $1,300.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.
1. Method #1: Use a tennis ball. 2. Method #2: Use your shoelace. 3. Method #3: Use a coat hanger. 4. Method #4: Use a rod and a screwdriver. 5. Method #5: Use a spatula.
6. Method #6: Use an inflatable wedge.
7. Method #7: Use a strip of plastic.
Contents
- How do you unlock a locked 2013 Ford Fusion with a key?
- How do you unlock the door on a Ford Fusion?
- How do you unlock a Ford Fusion Slim Jim?
- How do you unlock a car door without a key?
- How do you break into a car with a bobby pin?
- How can I break into my car?
- How do I get into my locked f150?
- How do you open a trunk without a key from the outside?
- How do you unlock a Ford?
- How do you unlock a 2020 Ford Fusion with a dead battery?
- How do you unlock a 2015 Ford Fusion?
- Can you unlock a car door with a knife?
- How do you open a car door with a Jimmy lock?
- How do you unlock a car door with a coat hanger?
How do you unlock a locked 2013 Ford Fusion with a key?
How do you unlock the door on a Ford Fusion?
How do you unlock a Ford Fusion Slim Jim?
Use a Thin Metal Rod. If you find it hard to use a Slim Jim, there is still another option left. It involves using a thin metal rod to press the auto-lock button usually found on the driver’s door. They are the buttons you use to lock and unlock the door while inside.
How do you unlock a car door without a key?
How do you break into a car with a bobby pin?
Stick the flat end of the pin into the top of the lock and bend it. Stick the pin in about 1 centimetre (0.39 in), then fold the rest the bobby pin until it’s flush against the face of the doorknob. This will bend the tip at an angle.28 jui. 2020
How can I break into my car?
1. Find a suitable “Slim Jim” tool.
2. Insert into the door.
3. Use the hook to open the lock.
4. Open the trunk and find access to the interior.
5. Crawl through the interior and manually unlock the door.
6. Broken Keys.
7. Locked Out.
8. Lost Key.
How do I get into my locked f150?
How do you open a trunk without a key from the outside?
1. Slide the hook end of the slimjim between the the passenger side window and window trim at the bottom of the window near the door handle.
2. Feel around with the slimjim for the lock rod.
3. Pull up on the lock rod with the slimjim.
4. Open the door and climb into the driver’s seat.
How do you unlock a Ford?
1. Make sure your vehicle is equipped with FordPass Connect™*
2. Download the FordPass App and add your vehicle**
3. On the Move (home) screen, press and hold the lock or unlock button until the circle begins to rotate.
How do you unlock a 2020 Ford Fusion with a dead battery?
How do you unlock a 2015 Ford Fusion?
Can you unlock a car door with a knife?
It’s easy to get into just about any car without a key. MacGyver could do almost anything with just a Victorinox Swiss Army Knife Knife And after watching this you can too. … You just need a stick and a pocket knife to unlock any car door with a push button lock.21 août 2019
How do you open a car door with a Jimmy lock?
How do you unlock a car door with a coat hanger?
Last Updated on: 3rd April 2021, 09:30 pm
It’s high time to break into your car if you locked keys in your car, isn’t it? Well, the process of unlocking a Ford fusion or breaking into a car is quite thrilling but can be done using a coat hanger or a slim metal tool.
We have nothing to do if our car’s key loses and gets disappeared around the road. I think it’s pretty easy to unlock a Ford fusion without keys. It would help if you went with extreme measures to get inside a Ford vehicle and retrieve keys locked inside.
Daniel, my closest friend, suggested me smashing the glass into thousands of pieces. It can cost you a bit more money, and it is not even the right way to break into your car or vehicle. We have three critical methods that specialize a Ford fusion even more comfortable with no prior locksmithing experience.
Note: We recommend calling a professional locksmith. If you don’t find any, please follow our steps below.
- Unlocking a Ford fusion with manual effort
- Unlocking a Ford Fusion with automatic locks!
- Unlocking a Ford Fusion’s door from outside
- Our recommendation-
- Conclusion
Unlocking a Ford fusion with manual effort
You have to do it from the inside of the vehicle. A powerful airbag can be a wedge to open the top of the car’s door, put metal into the car to touch the locking pin, and then pull the pin-up. You can frankly open the door in some vehicles a bit to insert a metal rod to unlock the doors.
Take a look at what’s your vehicle’s lock type. Even if there are two types of locking mechanisms, such as Manual lock and Automatic lock, that exist in the car, the Ford Fusion has an automatic lock as an alarm system.
Step: 1
Using a wedge of the airbag will hold up the door space and make a gap at the top of the car’s body, door, window, and doorframe. After making a gap, you can insert a ruler or knife through the gap and switch the doorstop for this purpose.
Step: 2
Inserting the ruler or knife into the door gap will make a space between the top of the door of your Ford vehicle. Pull out the corner of the door solidly using your fingers. Keep the door spaced, inserting the tool until the accomplishment.
Step: 3
Use a Lock Hook to grab the locking pin and pull the lock to open the lock. This is a tricky process as fishing in the pool. The locking pin takes some time, still does better work. Depending on the vehicle’s type, there are some struggles to open the lock using the hook. The Ford Fusion may take a bit of patience. An expert can do it better than a wrestler.
Unlocking a Ford Fusion with automatic
locks!
Breaking into the car’s interior with automatic locks is not easy as it means to be. You should focus on two main things in the case; the location of the unlocking button and the lock adjustment from the car‘s body.
A Ford Fusion has its unlock button on the center console and is easily accessible. Let’s know how to unlock a Ford fusion more easily than the first method!
As the Ford fusion has automatic locks located in the central console, insert a hook or loop inside the car to press the driver’s side’s lock button. Press the unlock button of the door through the tool at the end. Undoubtedly, it is the best technique till now that works!
Unlocking a Ford Fusion’s door from outside
Before starting this method, we request having a lockout tool for more value. It will make your work easier indeed. However, we don’t encourage people to go through this process as the process has much of risk creating damage to the door.
- A thin piece of metal, ruler, or coat hanger can be used to make the end. Make sure about the tool you take is much stronger and not folded over into the hook. You must insert the slim Jim or metal into the vehicle’s door. We recommend doing it on the passenger side door. It is not safe to do from the driver’s door as the driver’s seat has more wires between the windows. You are requested to pull the black weather stripping (found here on Amazon) with your fingers and make a quick insert into the door.
- Now, you can open the lock with the piece of metal or hook more comfortably than previous methods. In a Ford fusion vehicle, the locking mechanism is structured below the locking pin. A hard metal grabs the locking mechanism toward the lock. Once the hook grips the lock, pull it up.
- But why are we talking easy, easy and easy? The locking mechanism is established about two inches below the window. Note that the process may take nonstop tries until the lock is disengaged. This will work like a pro!
Our recommendation-
- ZMZILM Long Reach Grabber with Air Wedge Pump
ZMZLIM brings you the lockout tool for cars. It’s a professional’s kit with Long Reach Grabber, made with stainless steel, and the size of the grabber is made up to 67 inches in maximum. This kit’s airbag is made of TPU material and helps up to 300lbs to get the job done. You’ll also find 5 Pieces of different, non-marring, and durable wedges as lovely and more expensive tools. Great item to purchase as an emergency lockout!
Conclusion
We have answered the question ‘How to unlock a Ford fusion without keys’ in three different methods. Are you benefiting from us? However, A Ford Fusion has a difference of makes and models. Sometimes, you can use a keyless entry keypad, whereas sometimes, a physical keypad remains in the driver’s door. Police or a locksmith works best in the case to open the doors without damaging them.