FREQUENTLY ASKED QUESTIONS
IMW258 Mini H2O 3
How do I connect my speaker to my Bluetooth device?
To connect your speaker, start by pressing and holding the power button for approximately 5-8 seconds when powering on. Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Mini H20 3” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
What do I do if I’m having problems connecting my speaker to Bluetooth?
Press and hold the power button for approximately 8-10 seconds. Make sure to keep holding the power button down even after your speaker turns on, letting go once you see your speaker is listed in your phone’s Bluetooth settings menu as a device available for pairing. Then connect to the listed device.
How do I pair two speakers together with True Wireless Pairing?
First, start by powering on both speakers. On your first speaker, press and hold the power and the minus button at the same time for 3 seconds. (This speaker will act as the parent speaker) On the second speaker, press and hold the power button and the plus button at the same time for 3 seconds (this speaker will act as the child speaker) Allow for a few seconds for speakers to find each other. Once both speakers are paired together you will be able to listen to music at the same time through both speaker.
Which other speakers can I pair with?
You can pair with the following speakers: IMW258 IMW269 IMW449
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker.
How long does it take to receive a full charge on my speaker?
It takes approximately 2-3 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
How do I use the Voice Assistant feature on my speaker?
The Voice Assistant Feature allows you to access Siri on iPhone and Google Assistant on Android Phones through your speaker. This can be activated in two different ways. The first way is by tapping the power button twice. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Can I use my speaker to make phone calls?
Yes, your speaker can be used to make phone calls. This can be activated by: Pressing the power button once to answer or end a call To reject a call, press and hold the power button for 2 seconds.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW269 Baby Boom
How do I connect my speaker to my Bluetooth device?
To connect your speaker, start by pressing and holding the power button for approximately 5-8 seconds when powering on. Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Baby Boom” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
What do I do if I’m having problems connecting my speaker to Bluetooth?
Press and hold the power button for approximately 8-10 seconds. Make sure to keep holding the power button down even after your speaker turns on, letting go once you see your speaker is listed in your phone’s Bluetooth settings menu as a device available for pairing. Then connect to the listed device.
How do I pair two speakers together with True Wireless Pairing?
First, start by powering on both speakers. On your first speaker, press and hold the power and the minus button at the same time for 3 seconds. (This speaker will act as the parent speaker) On the second speaker, press and hold the power button and the plus button at the same time for 3 seconds (this speaker will act as the child speaker) Allow for a few seconds for speakers to find each other. Once both speakers are paired together you will be able to listen to music at the same time through both speaker.
Which other speakers can I pair with?
You can pair with the following speakers: IMW269 IMW258 IMW449
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 2-3 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
How do I use the Voice Assistant feature on my speaker?
The Voice Assistant Feature allows you to access Siri on iPhone and Google Assistant on Android Phones through your speaker. This can be activated in two different ways. The first way is by tapping the power button twice. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Can I use my speaker to make phone calls?
Yes, your speaker can be used to make phone calls. This can be activated by: Pressing the power button once to answer or end a call To reject a call, press and hold the power button for 2 seconds.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW270 Baby Boom XL
How do I connect my speaker to my Bluetooth device?
To connect your speaker, start by pressing and holding the power button for approximately 5-8 seconds when powering on. Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Baby Boom XL” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
What do I do if I’m having problems connecting my speaker to Bluetooth?
Press and hold the power button for approximately 8-10 seconds. Make sure to keep holding the power button down even after your speaker turns on, letting go once you see your speaker is listed in your phone’s Bluetooth settings menu as a device available for pairing. Then connect to the listed device.
How do I pair two speakers together with True Wireless Pairing?
First, start by powering on both speakers. On your first speaker, press and hold the power and the minus button at the same time for 3 seconds. (This speaker will act as the parent speaker) On the second speaker, press and hold the power button and the plus button at the same time for 3 seconds (this speaker will act as the child speaker) Allow for a few seconds for speakers to find each other. Once both speakers are paired together you will be able to listen to music at the same time through both speaker.
Which other speakers can I pair with?
You can pair with the following speakers: IMW269 IMW270 IMW258 IMW449
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 2-3 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
How do I use the Voice Assistant feature on my speaker?
The Voice Assistant Feature allows you to access Siri on iPhone and Google Assistant on Android Phones through your speaker. This can be activated in two different ways. The first way is by tapping the power button twice. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Can I use my speaker to make phone calls?
Yes, your speaker can be used to make phone calls. This can be activated by: Pressing the power button once to answer or end a call To reject a call, press and hold the power button for 2 seconds.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW449 Jacket H2O 4
How do I connect my speaker to my Bluetooth device?
To connect your speaker, start by pressing and holding the power button for approximately 5-8 seconds when powering on. Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Jacket H20 4” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
What do I do if I’m having problems connecting my speaker to Bluetooth?
Press and hold the power button for approximately 8-10 seconds. Make sure to keep holding the power button down even after your speaker turns on, letting go once you see your speaker is listed in your phone’s Bluetooth settings menu as a device available for pairing. Then connect to the listed device.
How do I pair two speakers together with True Wireless Pairing?
First, start by powering on both speakers. On your first speaker, press and hold the power and the minus button at the same time for 3 seconds. (This speaker will act as the parent speaker) On the second speaker, press and hold the power button and the plus button at the same time for 3 seconds (this speaker will act as the child speaker) Allow for a few seconds for speakers to find each other. Once both speakers are paired together you will be able to listen to music at the same time through both speaker.
Which other speakers can I pair with?
You can pair with the following speakers: IMW258 IMW269 IMW449
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 2-3 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
How do I use the Voice Assistant feature on my speaker?
The Voice Assistant Feature allows you to access Siri on iPhone and Google Assistant on Android Phones through your speaker. This can be activated in two different ways. The first way is by tapping the power button twice. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Can I use my speaker to make phone calls?
Yes, your speaker can be used to make phone calls. This can be activated by: Pressing the power button once to answer or end a call To reject a call, press and hold the power button for 2 seconds.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW479L Mini LifeJacket Jolt with Lights
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Mini LifeJacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
How do I change the light setting on my speaker?
To change the lighting on your speaker, press the star button.
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Can I charge my Smartphone using my speaker?
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW480 Mini LifeJacket Jolt
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Mini LifeJacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
If my phone is not Qi Wireless Charging enabled, can I still charge it with my speaker?
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW580L LifeJacket Jolt with Lights
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “LifeJacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
How do I change the light setting on my speaker?
To change the lighting on your speaker, press the star button.
How many different light settings are there?
There are 5 different light modes: Beat to the music, Pulse light, Color Changing, Constant solid, Off
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
If my phone is not Qi Wireless Charging enabled, can I still charge it with my speaker?
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW581L BoomJacket Jolt with Lights
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “BoomJacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
How do I change the light setting on my speaker?
To change the lighting on your speaker, press the star button.
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
If my phone is not Qi Wireless Charging enabled, can I still charge it with my speaker?
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW790 LifeJacket XL Jolt
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “LifeJacket XL Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
If my phone is not Qi Wireless Charging enabled, can I still charge it with my speaker?
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW889L Super LifeJacket Jolt with Lights
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Super Lifejacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
How do I change the light setting on my speaker?
To change the lighting on your speaker, press the star button.
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
If my phone is not Qi Wireless Charging enabled, can I still charge it with my speaker?
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW899 SoundBucket XL
How do I charge my speaker?
To charge your speaker, plug the included AC adapter into a power and plug into your speaker. Once speaker is charging, you will see an orange LED light illuminated. When the speaker is finished charging the LED light will turn off.
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
How do I use NFC pairing on my speaker?
To use NFC pairing with a compatible device – simple tap your NFC enabled phone against the Altec Logo located on the front of your speaker. You phone will automatically pair! *NFC Pairing has to be turned on in your smartphone
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
If my phone is not Qi Wireless Charging enabled, can I still charge it with my speaker?
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Soundbucket XL” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I change the light setting on my speaker?
To change the lighting on your speaker, press the star button.
How do I control the music on my speaker?
The speaker comes included with convenient control located on the top of your speaker: Press the play button to play or pause a song Press the Volume up button to turn up to sound on your speaker or switch to the next song Press the Volume down button to turn down the volume or to go back to the previous song.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW901 SoundBucket
How do I charge my speaker?
To charge your speaker, plug the included AC adapter into a power and plug into your speaker. Once speaker is charging, you will see an orange LED light illuminated. When the speaker is finished charging the LED light will turn off.
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
How do I use NFC pairing on my speaker?
To use NFC pairing with a compatible device – simple tap your NFC enabled phone against the Altec Logo located on the front of your speaker. You phone will automatically pair! *NFC Pairing has to be turned on in your smartphone
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
If my phone is not Qi Wireless Charging enabled, can I still charge it with my speaker?
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Soundbucket” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I change the light setting on my speaker?
To change the lighting on your speaker, press the star button.
How do I control the music on my speaker?
The speaker comes included with convenient control located on the top of your speaker: Press the play button to play or pause a song Press the Volume up button to turn up to sound on your speaker or switch to the next song Press the Volume down button to turn down the volume or to go back to the previous song.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW991 RockBox
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “RockBox” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
How do I change the light setting on my speaker?
To change the lighting on your speaker, press the star button.
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMW999 RockBox XL
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “RockBox XL” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I access Voice Assistant on my speaker?
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
How do I change the light setting on my speaker?
To change the lighting on your speaker, press the star button.
How do I charge my speaker?
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
What charger does my speaker use?
Your speaker uses a Micro USB Cable.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If I drop my speaker in the water, will it float?
Yes, our speakers float to the top of the water to prevent loss of your speaker!
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
IMT804 Sonic Boom
How do I connect my speaker to my Bluetooth device?
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Sonic Boom 2” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep
How do I pair my speaker with house party pairing?
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Which other speakers can I pair with?
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
How do I charge my speaker?
Your speaker comes included with an AC Adapter to charge your speaker. Plug your AC Adapter into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
How long does it take to receive a full charge on my speaker?
It takes approximately 4-5 hours to receive a full charge.
Is there anyway to extend the battery life of my speaker?
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
What charger does my speaker use?
Your speaker uses an AC Adapter.
Is my speaker waterproof?
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Is there any care or maintenance with my speaker?
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
What does my warranty cover and for how long is my warranty?
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.