Fumoto oil drain valve subaru outback

  • $4.00 H-001 : Straight Hose End 3/8"

    Straight Hose End for small body(part number EZ-101 - EZ-115, EZ-124, EZ-125) valves.  Just screw in the Hose End to the EZ Oil Drain Valve and tighten with a small wrench. The Hose Ends are interchangeable, making it...

    Compare

  • $7.00 L-001 : L-Shape Hose End 3/8"

    L-Shape Hose End for small body(parts number EZ-101 - EZ-115, EZ-124, EZ-125) valves. Just screw in the Hose End to the EZ Oil Drain Valve and tighten with a small wrench. The Hose Ends are interchangeable, making it a...

    Compare

  • $1.80 3/8" Vinyl Hose (18 inch long piece)

    This vinyl clear hose fits Straight(H-001) and L-Shape(L-001) Hose Ends for small body valve. 18" long vinyl clear hose  3/8" I.D. If you need a longer piece than 18", order 2 and make a note when you place an...

    Compare

  • $1.50 Small Plug Cap

    For All Small Valves EZ-101 - EZ-115, EZ-124, EZ-125. This protective cap screws into the valve just like the Hose End to prevent dust and dirt build up. *1 cap per order.

    Compare

  • $2.50 Large Plug Cap

    For All Medium and Large Valves, EZ-2 - EZ-8 and EZ-201 - EZ-215. This protective cap screws into the valve just like the Hose End to prevent dust and dirt build up. *1 cap per order...

    Compare

  • $1.00 Small Safety Clip

    Small Safety Clip(5/8") For small body valve.   EZ-101, EZ-102, EZ-103, EZ-104, EZ-105, EZ-106, EZ-107, EZ-108, EZ-109, EZ-110, EZ-111, EZ-115, EZ-124, EZ-125 For...

    Compare

  • $1.00 3/8" Hose End Extension Cap

    For All Straight(H-001) and L-Shape(L-001) Hose Ends for small body valve. *Prevents dust and dirt from going inside the Hose Ends.*2 caps per order.

    Compare


Most relevant reviews

  • Great little valve makes things easier.

    Just started using it so I can't confirm the longevity of the product. I really like the convenience and installation was simple.

    Verified purchase: Yes | Condition: New

  • 5 out of 5 stars

    by decodanAug 20, 2019

    Every vehicle

    Fumoto makes changing oil fast, easy and clean. I have one on all my vehicles and have put them on grandsons cars so when I change their oil it is in and out, no muss no fuss.

    Verified purchase: Yes | Condition: New

  • Perfect Installation

    Installation went perfect with no cross threading and no leaking afterward. If the open/close lever works like it's supposed to on my next oil change with minimal or no mess it's will be a great product.

    Verified purchase: Yes | Condition: New

  • A must have.

    It is not the cheapest drain plug on the market, but since you only buy it once, and don’t have to replace a crush gasket every oil change, it’s worth the money. In fact it’s a no brainer really. Easy oil changes without a mess. Brilliant.

    Verified purchase: Yes | Condition: New

  • Should have bought one years ago

    Makes oil changes a BREEZE! The design makes it virtually impossible for the valve to open unintentionally, but with basically the flip of a switch you have your oil pan draining out

    Verified purchase: Yes | Condition: New

Why is my Fumoto valve leaking?

If the leak is coming from the oil drain port, The threads on the oil pan may be damaged. If this is the case, the valve may not be sealed completely to the drain port, and the threads will need to be fixed prior to re-install the valve with a new gasket washer(or an o-ring for SX type valves).

How tight should a Fumoto valve be?

Fully Tighten: Tighten with a crescent wrench on the body of the valve* ⅛ to ¼ turn past hand tight, or to the value shown on the torque chart for your valve model. Do not over tighten.

Toplist

Latest post

TAGs