Bissell CrossWave is a multi-purpose wet-dry vacuum cleaner. It means this wet-dry vac allows you to sweep & wash the floor at the same time to leave the surface dirt-free. But, sometimes, you don’t need to mop the floor; you just need to vacuum the surface to pick up only dry messes, which brings this question: Can you use the Bissell
CrossWave as just a vacuum? Yes, you can use your Bissell CrossWave as just a regular vacuum cleaner. What you need to do is- just keep the water tank empty. Then, vacuum your surface with it as you do every day. If you are still in confusion, keep scrolling as we will let you know how to use the Bissell CrossWave without water.
Related Articles
Can You Use Bleach on the Epoxy Floor
Can You Use Mr. Clean on Hardwood
Floors
Can You Put Floor Cleaner in a Steam Mop
Yes, you use the Bissell CrossWave as just a regular vacuum. Just leave the water tank empty, or don’t fill the tank with water. Then, turn it on, and you can use it as a regular vacuum to pick up dirt, debris, and dust from multiple surfaces.
Bissell CrossWave is a multi-surface wet-dry vacuum cleaner. In other words, you can pick up both wet and dry messes with it to leave the surface spotless. However, you can easily disable the mopping function by keeping the water tank empty. Indeed, no water means no mopping.
In short, don’t refill the water tank, and you will be ready to use this wet-dry vacuum only as a regular vacuum cleaner to vacuum the surface. Keep in mind; the cleaning ability will decrease when you use it as a vacuum only. It fails to deep-clean the carpeted floor.
How To Use Bissell CrossWave As Just A Vacuum?
We mentioned above that it’s possible to use the Bissell CrossWave Wet-Dry vacuum cleaner as just a vacuum. Now, we let you learn how to use it like a vacuum cleaner only.
First off, make sure you remove the water tank from the unit. You can find two water tanks (a clean tank and a dirty tank) located on the back of the machine. Just lift the clean water tank straight up to remove it from the unit. We should remove it to disable the mopping function.
Secondly, plug the unit into a dedicated grounded outlet. Then, press on the cleaning mode (Hard Floor or Rug) to turn on your vacuum cleaner.
Thirdly, recline the unit backward to start the brushroll spinning. Now, push your vacuum cleaner forward and backward and start passing it on the floor to pick up dirt & messes from the surface.
Finally, press on the cleaning mode a second time to turn off the unit when you finish the cleaning workflow.
How To Clean Bissell CrossWave After Use
This chapter will let you learn how to clean your Bissell CrossWave after every use.
Start with removing the dirty tank from the unit. To remove the dirty tank, press down the recessed button on the top of the tank.
Make sure you grab the front handle while tapping on the recessed button and pull out the dirty tank from the unit.
Now, hold the top of the dirty tank in the recessed area on each side of the filter and pull upward to remove it from the top of the tank.
Next, pour the dirty water & debris into the sink and rinse the dirty tank with water. Afterward, pull the vacuum filter from the top of the dirty tank and wash this filter with the solution of warm water & detergent.
Then, leave the filter and dirty tank to let them dry.
Finally, reassemble everything back into its place and make it ready for the next use.
FAQs
Can Bissell CrossWave vacuum without water?
Yes, Bissell CrossWave can vacuum without water though it’s a wet-dry vacuum cleaner. Just leave the water tank empty and vacuum with it to pick up debris.
Can you use Bissell CrossWave on carpet without water?
Yes, you can use Bissell CrossWave on a carpet without water. It will outperform many premium vacuums and suck away dirt & debris from the carpet.
Can you put Pine Sol in a Bissell CrossWave?
No, you shouldn’t put Pine-Sol in a Bissell CrossWave as it can damage the unit. The Pine-Sol will eat up the gasket and cause a leak, which may break down the suction. Indeed, you should avoid putting Pine-Sol into your vacuum to prolong the life of your wet-dry vacuum cleaner.
How long does the Bissell CrossWave battery last?
The batter of the Bissell CrossWave will last around 25 minutes to let you suck away dirt & debris from the surface optimally.
Does the Bissell Crosswave vacuum and mop at the same time?
Yes, Bissell Crosswave can vacuum and mop at the same time. So, you don’t need to wash or sweep your surface separately. It allows you to pick up both wet & dry messes to leave the surface spotless.
Conclusion
We hope you get the answer to your question: Can you use the Bissell CrossWave as just a vacuum?
Yes, you can use it as a regular vacuum cleaner to clean your low-pile carpet or rug areas. Just remove the water tank from the unit or keep it empty. Then, move it forward and backward and vacuum your floor to pick up dirt & debris.
However, you might lose the cleaning efficiency of this vacuum cleaner if you don’t fill the water tank. We recommend you use it according to the guideline of the manual to get the most out of it.